XC6118C11BGR-G
Product Overview
Category
XC6118C11BGR-G belongs to the category of voltage regulators.
Use
It is primarily used for voltage regulation in electronic circuits.
Characteristics
- Package: BGA (Ball Grid Array)
- Essence: Voltage regulator IC (Integrated Circuit)
- Packaging/Quantity: Available in tape and reel packaging, with a quantity of 3000 units per reel.
Specifications
The specifications of XC6118C11BGR-G are as follows:
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 1.1V
- Output Current: 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 40μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The pin configuration of XC6118C11BGR-G is as follows:
- VIN: Input voltage pin
- GND: Ground pin
- EN: Enable pin
- VOUT: Output voltage pin
- NC: No connection pin
Functional Features
- Low dropout voltage: The XC6118C11BGR-G exhibits a low dropout voltage, ensuring efficient voltage regulation even when the input voltage is close to the desired output voltage.
- Low quiescent current: With a low quiescent current, the XC6118C11BGR-G minimizes power consumption during standby or idle modes.
- Thermal shutdown protection: The device incorporates thermal shutdown protection, preventing damage due to excessive temperature.
Advantages and Disadvantages
Advantages: - Compact BGA package allows for space-saving integration into small electronic devices. - Low dropout voltage ensures stable output voltage even under varying input conditions. - Low quiescent current minimizes power consumption.
Disadvantages: - Limited output current capacity of 150mA may not be suitable for high-power applications. - BGA package may require specialized equipment for soldering and rework.
Working Principles
The XC6118C11BGR-G is a linear voltage regulator that operates by comparing the input voltage with a reference voltage. It adjusts the output voltage to maintain a stable value, compensating for fluctuations in the input voltage.
Detailed Application Field Plans
XC6118C11BGR-G finds application in various electronic devices and systems, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT (Internet of Things) devices
Detailed and Complete Alternative Models
Some alternative models to XC6118C11BGR-G include: - XC6118C11BGR-G-XX: Similar specifications with different package options. - XC6118C12BGR-G: Higher output voltage variant. - XC6118C10BGR-G: Lower output voltage variant.
These alternative models provide flexibility in choosing the appropriate voltage regulator based on specific requirements.
Word count: 346 words
Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät XC6118C11BGR-G :n soveltamiseen teknisissä ratkaisuissa
Sure! Here are 10 common questions and answers related to the application of XC6118C11BGR-G in technical solutions:
Q: What is XC6118C11BGR-G? A: XC6118C11BGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6118C11BGR-G? A: The operating voltage range of XC6118C11BGR-G is typically between 0.9V and 6.0V.
Q: How does XC6118C11BGR-G help in technical solutions? A: XC6118C11BGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, DSPs, or other digital devices when the power supply voltage falls below a specified level, ensuring proper system initialization.
Q: What is the typical reset voltage threshold of XC6118C11BGR-G? A: The typical reset voltage threshold of XC6118C11BGR-G is 1.1V.
Q: Can XC6118C11BGR-G be used in battery-powered applications? A: Yes, XC6118C11BGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA, making it suitable for power-sensitive designs.
Q: Does XC6118C11BGR-G have any built-in delay time for the reset signal? A: Yes, XC6118C11BGR-G has a built-in delay time of typically 200ms to ensure stable power supply before releasing the reset signal.
Q: Can XC6118C11BGR-G be used in automotive applications? A: Yes, XC6118C11BGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: What is the package type of XC6118C11BGR-G? A: XC6118C11BGR-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.
Q: Is XC6118C11BGR-G RoHS compliant? A: Yes, XC6118C11BGR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.
Q: Where can I find more information about XC6118C11BGR-G? A: You can find more detailed information about XC6118C11BGR-G, including datasheets and application notes, on the manufacturer's website or by contacting their technical support team.