XC6119C13ANR-G belongs to the category of integrated circuits (ICs).
This product is commonly used in electronic devices for voltage detection and monitoring.
XC6119C13ANR-G is packaged in a SOT-23-5 package. It is available in tape and reel packaging, with a quantity of 3000 units per reel.
The XC6119C13ANR-G has a total of five pins arranged as follows:
```
| | --|____|-- | | | | |____| ```
Pin 1: GND (Ground) Pin 2: VDD (Supply voltage) Pin 3: OUT (Output) Pin 4: NC (No connection) Pin 5: EN (Enable)
The XC6119C13ANR-G operates based on a voltage divider network and a comparator. The input voltage is divided and compared to an internal reference voltage. When the input voltage falls below the threshold, the output goes low, indicating a voltage drop.
The XC6119C13ANR-G finds applications in various electronic devices that require voltage monitoring and protection. Some potential application fields include:
For those seeking alternative options, the following models provide similar functionality to the XC6119C13ANR-G:
These alternative models can be considered based on specific application requirements and compatibility.
In conclusion, the XC6119C13ANR-G is a versatile integrated circuit used for voltage detection and monitoring in various electronic devices. Its wide voltage detection range, accuracy, low quiescent current, and small package size make it suitable for a range of applications. However, its active low output and limited output voltage options should be taken into consideration when selecting this IC for specific designs.
Sure! Here are 10 common questions and answers related to the application of XC6119C13ANR-G in technical solutions:
Q: What is XC6119C13ANR-G? A: XC6119C13ANR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides an output signal when it falls below a certain threshold.
Q: What is the operating voltage range of XC6119C13ANR-G? A: The operating voltage range of XC6119C13ANR-G is typically between 0.8V and 6.0V.
Q: How does XC6119C13ANR-G work? A: XC6119C13ANR-G compares the input voltage with a reference voltage internally set within the IC. When the input voltage drops below the reference voltage, it triggers an output signal.
Q: What is the output type of XC6119C13ANR-G? A: XC6119C13ANR-G has an open-drain output type, which means it can sink current but cannot source current.
Q: What is the typical quiescent current of XC6119C13ANR-G? A: The typical quiescent current of XC6119C13ANR-G is around 1.0µA, making it suitable for low-power applications.
Q: Can XC6119C13ANR-G be used in battery-powered devices? A: Yes, XC6119C13ANR-G is commonly used in battery-powered devices due to its low quiescent current and wide operating voltage range.
Q: What is the accuracy of the voltage detection threshold in XC6119C13ANR-G? A: The accuracy of the voltage detection threshold in XC6119C13ANR-G is typically ±1.5%.
Q: Can XC6119C13ANR-G be used for overvoltage protection? A: No, XC6119C13ANR-G is specifically designed for undervoltage detection and does not provide overvoltage protection.
Q: What is the response time of XC6119C13ANR-G? A: The response time of XC6119C13ANR-G is typically around 200µs, allowing for quick detection of voltage drops.
Q: What are some common applications of XC6119C13ANR-G? A: XC6119C13ANR-G is commonly used in various technical solutions such as battery-powered devices, portable electronics, automotive systems, power management circuits, and more, where undervoltage detection is critical for proper operation.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6119C13ANR-G.