Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
XC6119N36ANR-G

XC6119N36ANR-G

Product Overview

Category

XC6119N36ANR-G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • High efficiency
  • Low power consumption

Package

XC6119N36ANR-G is available in a small surface-mount package, which makes it suitable for compact electronic devices.

Essence

The essence of XC6119N36ANR-G lies in its ability to regulate voltage and manage power efficiently, ensuring stable operation of electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.6V
  • Output Current: 100mA
  • Dropout Voltage: 200mV @ 50mA
  • Quiescent Current: 30μA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • Voltage regulation: XC6119N36ANR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Power management: It efficiently manages power consumption, reducing energy waste.
  • Low dropout voltage: The device maintains a low voltage drop between input and output, maximizing efficiency.
  • Enable pin: The optional enable pin allows for easy on/off control of the device.

Advantages and Disadvantages

Advantages

  • Compact size enables integration into small electronic devices.
  • High efficiency results in reduced power consumption.
  • Wide input voltage range allows for versatility in various applications.
  • Low dropout voltage minimizes energy loss.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Lack of built-in protection features may require additional circuitry for certain applications.

Working Principles

XC6119N36ANR-G operates based on a voltage regulation principle. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, regardless of input voltage variations.

Detailed Application Field Plans

XC6119N36ANR-G finds applications in various electronic devices, including but not limited to: 1. Mobile phones 2. Portable media players 3. Digital cameras 4. Wearable devices 5. IoT devices

Detailed and Complete Alternative Models

  1. XC6119N33ANR-G: Similar to XC6119N36ANR-G, but with an output voltage of 3.3V.
  2. XC6119N50ANR-G: Similar to XC6119N36ANR-G, but with an output voltage of 5.0V.
  3. XC6119N25ANR-G: Similar to XC6119N36ANR-G, but with an output voltage of 2.5V.

These alternative models provide flexibility in choosing the appropriate output voltage for specific applications.

Word count: 399 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät XC6119N36ANR-G :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of XC6119N36ANR-G in technical solutions:

  1. Q: What is XC6119N36ANR-G? A: XC6119N36ANR-G is a voltage detector IC (Integrated Circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6119N36ANR-G? A: The operating voltage range of XC6119N36ANR-G is from 0.8V to 6.0V.

  3. Q: How does XC6119N36ANR-G work? A: XC6119N36ANR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below the reference voltage, it triggers an output signal indicating a low voltage condition.

  4. Q: What is the output type of XC6119N36ANR-G? A: XC6119N36ANR-G has an open-drain output type, which means it can be connected to other devices through a pull-up resistor to achieve different logic levels.

  5. Q: Can XC6119N36ANR-G be used for undervoltage detection? A: Yes, XC6119N36ANR-G is commonly used for undervoltage detection. It can detect when the input voltage drops below a certain threshold and trigger an action accordingly.

  6. Q: What is the typical quiescent current consumption of XC6119N36ANR-G? A: The typical quiescent current consumption of XC6119N36ANR-G is very low, usually around 1.0µA.

  7. Q: Can XC6119N36ANR-G be used in battery-powered applications? A: Yes, XC6119N36ANR-G is suitable for battery-powered applications due to its low quiescent current consumption, which helps conserve battery life.

  8. Q: What is the accuracy of the voltage detection threshold in XC6119N36ANR-G? A: The accuracy of the voltage detection threshold in XC6119N36ANR-G is typically ±1.5%.

  9. Q: Is XC6119N36ANR-G compatible with both CMOS and TTL logic levels? A: Yes, XC6119N36ANR-G is compatible with both CMOS (0V to Vcc) and TTL (0V to 5V) logic levels.

  10. Q: Can XC6119N36ANR-G be used in automotive applications? A: Yes, XC6119N36ANR-G is suitable for automotive applications as it can withstand a wide operating temperature range (-40°C to +105°C) and has built-in protection features against reverse polarity and load dump events.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.