XC6121A741MR-G
Product Overview
Category
XC6121A741MR-G belongs to the category of voltage regulators.
Use
This product is used for regulating voltage in electronic circuits.
Characteristics
- Voltage regulation capability
- Compact package size
- Low power consumption
- High efficiency
Package
XC6121A741MR-G is available in a small form factor package, suitable for surface mount technology (SMT) applications.
Essence
The essence of XC6121A741MR-G lies in its ability to provide stable and regulated voltage output to ensure proper functioning of electronic devices.
Packaging/Quantity
This product is typically packaged in reels or tape and reel packaging. The quantity per reel varies depending on the manufacturer's specifications.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage Range: 1.2V - 5.5V
- Maximum Output Current: 150mA
- Dropout Voltage: 200mV (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6121A741MR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- EN: Enable pin (optional)
Functional Features
- Voltage regulation: XC6121A741MR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: This product incorporates overcurrent protection to safeguard connected devices.
- Thermal shutdown: In case of excessive temperature, the regulator shuts down to prevent damage.
- Low quiescent current: The low power consumption of XC6121A741MR-G makes it suitable for battery-powered applications.
Advantages and Disadvantages
Advantages
- Small package size allows for space-saving designs.
- High efficiency results in minimal power loss.
- Wide input voltage range provides flexibility in various applications.
- Overcurrent protection ensures device safety.
Disadvantages
- Limited maximum output current may restrict usage in high-power applications.
- Dropout voltage may affect performance in low input voltage scenarios.
Working Principles
XC6121A741MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for changes in input voltage and load conditions.
Detailed Application Field Plans
XC6121A741MR-G finds applications in various electronic devices and systems, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices - Automotive electronics
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6121A741MR-G are: - XC6121B741MR-G - XC6121C741MR-G - XC6121D741MR-G - XC6121E741MR-G
These models offer similar functionality and characteristics, providing options for different design requirements.
Word count: 382 words
Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät XC6121A741MR-G :n soveltamiseen teknisissä ratkaisuissa
Sure! Here are 10 common questions and answers related to the application of XC6121A741MR-G in technical solutions:
Q1: What is XC6121A741MR-G? A1: XC6121A741MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.
Q2: What is the operating voltage range of XC6121A741MR-G? A2: The operating voltage range of XC6121A741MR-G is typically between 0.8V and 6.0V.
Q3: How does XC6121A741MR-G work? A3: XC6121A741MR-G works by comparing the input voltage with a reference voltage. When the input voltage drops below the reference voltage, it triggers an internal circuit that generates an output signal.
Q4: What is the output type of XC6121A741MR-G? A4: XC6121A741MR-G has an open-drain output type, which means it can sink current but cannot source current. An external pull-up resistor is required to pull the output signal high.
Q5: What is the typical quiescent current of XC6121A741MR-G? A5: The typical quiescent current of XC6121A741MR-G is around 1.0µA, making it suitable for low-power applications.
Q6: Can XC6121A741MR-G be used in battery-powered devices? A6: Yes, XC6121A741MR-G is commonly used in battery-powered devices due to its low quiescent current and wide operating voltage range.
Q7: What is the accuracy of the voltage detection in XC6121A741MR-G? A7: The accuracy of voltage detection in XC6121A741MR-G is typically ±2.0%.
Q8: Can XC6121A741MR-G be used for overvoltage protection? A8: No, XC6121A741MR-G is specifically designed for undervoltage detection and does not provide overvoltage protection.
Q9: What is the temperature range of XC6121A741MR-G? A9: The temperature range of XC6121A741MR-G is typically between -40°C and +85°C.
Q10: Is XC6121A741MR-G available in different package options? A10: Yes, XC6121A741MR-G is available in a variety of package options, including SOT-25, SOT-89, and USP-6B.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.