Torex Semiconductor Ltd
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
XC6122A316ER-G
Näytä Yksityiskohdat DataSheets

XC6122A316ER-G

Product Overview

Category

XC6122A316ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Small size and low profile package
  • Low power consumption
  • High accuracy and stability
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6122A316ER-G is available in a small SOT-23-5 package.

Essence

The essence of XC6122A316ER-G lies in its ability to regulate voltage efficiently and reliably in various electronic applications.

Packaging/Quantity

This product is typically packaged in reels, with 3000 units per reel.

Specifications

  • Input Voltage Range: 1.8V - 6.0V
  • Output Voltage: 3.16V
  • Output Current: 150mA (max)
  • Dropout Voltage: 200mV (typ)
  • Quiescent Current: 30µA (typ)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122A316ER-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. NC (No Connection)
  4. VOUT (Output Voltage)
  5. EN (Enable)

Functional Features

  • Voltage regulation within a specified range
  • Overcurrent protection prevents damage to the circuit
  • Thermal shutdown protection prevents overheating
  • Enable pin allows control of the regulator's operation

Advantages and Disadvantages

Advantages

  • Small size and low profile package make it suitable for space-constrained applications
  • Low power consumption helps conserve energy
  • High accuracy and stability ensure reliable voltage regulation
  • Wide input voltage range allows compatibility with various power sources

Disadvantages

  • Limited output current may not be suitable for high-power applications
  • Dropout voltage may cause a slight decrease in efficiency

Working Principles

XC6122A316ER-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, regardless of changes in input voltage or load conditions.

Detailed Application Field Plans

XC6122A316ER-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Medical equipment - Industrial automation

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122A316ER-G are: - XC6122B316ER-G: Similar specifications, but with a different output voltage (3.16V) - XC6122C316ER-G: Similar specifications, but with a different output voltage (3.16V) - XC6122D316ER-G: Similar specifications, but with a different output voltage (3.16V)

These alternative models provide flexibility in choosing the appropriate voltage regulator based on specific application requirements.

Word count: 408 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät XC6122A316ER-G :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of XC6122A316ER-G in technical solutions:

  1. Question: What is XC6122A316ER-G?
    - Answer: XC6122A316ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122A316ER-G?
    - Answer: The operating voltage range of XC6122A316ER-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6122A316ER-G work?
    - Answer: XC6122A316ER-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below a certain threshold, it triggers an output signal indicating a low voltage condition.

  4. Question: What is the output type of XC6122A316ER-G?
    - Answer: XC6122A316ER-G has an open-drain output type, which means it can be connected to other devices or circuits to indicate a low voltage condition.

  5. Question: What is the typical quiescent current consumption of XC6122A316ER-G?
    - Answer: The typical quiescent current consumption of XC6122A316ER-G is very low, usually around 1.0µA.

  6. Question: Can XC6122A316ER-G be used for overvoltage detection?
    - Answer: No, XC6122A316ER-G is specifically designed for undervoltage detection. It is not suitable for overvoltage detection.

  7. Question: What is the typical accuracy of XC6122A316ER-G?
    - Answer: The typical accuracy of XC6122A316ER-G is ±1.5% at room temperature.

  8. Question: Can XC6122A316ER-G be used in automotive applications?
    - Answer: Yes, XC6122A316ER-G is AEC-Q100 qualified and can be used in automotive applications.

  9. Question: Does XC6122A316ER-G have built-in hysteresis?
    - Answer: Yes, XC6122A316ER-G has a built-in hysteresis of typically 10% to prevent oscillation near the threshold voltage.

  10. Question: What is the package type of XC6122A316ER-G?
    - Answer: XC6122A316ER-G is available in a SOT-23-3 package, which is a small surface-mount package commonly used in electronic devices.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.