Torex Semiconductor Ltd
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
XC6122A330MR-G
Näytä Yksityiskohdat DataSheets

XC6122A330MR-G

Product Overview

Category

XC6122A330MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • High efficiency

Package

XC6122A330MR-G is available in a small surface-mount package.

Essence

The essence of XC6122A330MR-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 200mA (maximum)
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122A330MR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6122A330MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
  • Thermal shutdown: In case of excessive temperature, the device shuts down to prevent damage.
  • Low quiescent current: The low quiescent current helps conserve power.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • Efficient voltage regulation ensures reliable performance of connected devices.
  • Overcurrent protection enhances the safety of the circuit.
  • Wide operating temperature range enables usage in various environments.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight decrease in efficiency.

Working Principles

XC6122A330MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for any variations in the input voltage.

Detailed Application Field Plans

XC6122A330MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122A330MR-G are: - LM1117-3.3 - MCP1700-3302E/TO - AP2112K-3.3TRG1 - TS2940CZ-3.3

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 408 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät XC6122A330MR-G :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of XC6122A330MR-G in technical solutions:

  1. Question: What is XC6122A330MR-G?
    - Answer: XC6122A330MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic applications.

  2. Question: What is the operating voltage range of XC6122A330MR-G?
    - Answer: The operating voltage range of XC6122A330MR-G is from 0.7V to 6.0V.

  3. Question: What is the output voltage of XC6122A330MR-G?
    - Answer: The output voltage of XC6122A330MR-G is fixed at 3.3V.

  4. Question: How does XC6122A330MR-G work?
    - Answer: XC6122A330MR-G works by continuously monitoring the input voltage. When the input voltage drops below a certain threshold, it triggers an internal reset signal, which can be used to control other components or circuits in the system.

  5. Question: What is the quiescent current consumption of XC6122A330MR-G?
    - Answer: The quiescent current consumption of XC6122A330MR-G is typically around 1.0µA, making it suitable for low-power applications.

  6. Question: Can XC6122A330MR-G be used in battery-powered devices?
    - Answer: Yes, XC6122A330MR-G is well-suited for battery-powered devices due to its low quiescent current consumption.

  7. Question: Is XC6122A330MR-G compatible with both CMOS and TTL logic levels?
    - Answer: Yes, XC6122A330MR-G is compatible with both CMOS and TTL logic levels, making it versatile for various digital applications.

  8. Question: What is the temperature range of operation for XC6122A330MR-G?
    - Answer: XC6122A330MR-G has an operating temperature range of -40°C to +85°C.

  9. Question: Can XC6122A330MR-G be used in automotive applications?
    - Answer: Yes, XC6122A330MR-G is AEC-Q100 qualified, making it suitable for automotive applications that require high reliability and performance.

  10. Question: Are there any additional features or protections provided by XC6122A330MR-G?
    - Answer: Yes, XC6122A330MR-G includes features like a built-in delay circuit, hysteresis function, and overcurrent protection, which enhance its performance and reliability in various technical solutions.

Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.