Torex Semiconductor Ltd
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
XC6122A621MR-G
Näytä Yksityiskohdat DataSheets

XC6122A621MR-G

Product Overview

Category

XC6122A621MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • Low power consumption
  • High accuracy
  • Wide input voltage range

Package

XC6122A621MR-G comes in a small surface-mount package.

Essence

The essence of XC6122A621MR-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

The product is typically packaged in reels and is available in large quantities.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.1V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)

Detailed Pin Configuration

XC6122A621MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Low dropout voltage
  • Built-in overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • Small form factor
  • Low power consumption
  • Wide input voltage range
  • Overcurrent and short-circuit protection

Disadvantages

  • Limited output current capacity
  • Fixed output voltage

Working Principles

XC6122A621MR-G operates based on the principle of linear voltage regulation. It uses a feedback mechanism to maintain a constant output voltage regardless of changes in the input voltage or load conditions. The internal circuitry adjusts the resistance to regulate the voltage and ensure stability.

Detailed Application Field Plans

XC6122A621MR-G finds applications in various electronic devices, including:

  1. Mobile phones
  2. Portable media players
  3. Digital cameras
  4. Wearable devices
  5. IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122A621MR-G are:

  1. XC6206P332MR-G
  2. LM1117IMPX-3.3/NOPB
  3. MCP1700T-3302E/TT

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

In conclusion, XC6122A621MR-G is a compact and efficient voltage regulator with a wide range of applications. Its small size, low power consumption, and built-in protection features make it suitable for various electronic devices. However, its limited output current capacity and fixed output voltage should be taken into consideration when selecting the appropriate model for a specific application.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät XC6122A621MR-G :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of XC6122A621MR-G in technical solutions:

  1. Question: What is XC6122A621MR-G?
    - Answer: XC6122A621MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level in electronic circuits.

  2. Question: What is the operating voltage range of XC6122A621MR-G?
    - Answer: The operating voltage range of XC6122A621MR-G is from 0.8V to 6.0V.

  3. Question: How does XC6122A621MR-G work?
    - Answer: XC6122A621MR-G continuously monitors the input voltage and compares it with a reference voltage. When the input voltage drops below the reference voltage, it triggers an output signal.

  4. Question: What is the output type of XC6122A621MR-G?
    - Answer: XC6122A621MR-G has an open-drain output type, which means it can be connected to other devices or circuits for further processing.

  5. Question: What is the typical quiescent current consumption of XC6122A621MR-G?
    - Answer: The typical quiescent current consumption of XC6122A621MR-G is very low, usually around 1.0µA.

  6. Question: Can XC6122A621MR-G be used in battery-powered applications?
    - Answer: Yes, XC6122A621MR-G is suitable for battery-powered applications due to its low quiescent current consumption.

  7. Question: What is the hysteresis voltage of XC6122A621MR-G?
    - Answer: The hysteresis voltage of XC6122A621MR-G is typically 0.1V, which helps to prevent false triggering caused by voltage fluctuations.

  8. Question: Can XC6122A621MR-G be used for overvoltage protection?
    - Answer: No, XC6122A621MR-G is primarily designed for undervoltage detection and does not provide overvoltage protection.

  9. Question: What is the temperature range of XC6122A621MR-G?
    - Answer: The temperature range of XC6122A621MR-G is from -40°C to +85°C, making it suitable for a wide range of operating conditions.

  10. Question: Is XC6122A621MR-G RoHS compliant?
    - Answer: Yes, XC6122A621MR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.