Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
XC6122E721MR-G

XC6122E721MR-G

Product Overview

Category

XC6122E721MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • High efficiency

Package

XC6122E721MR-G comes in a small surface mount package.

Essence

The essence of XC6122E721MR-G lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

XC6122E721MR-G is typically packaged in reels and is available in large quantities.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.8V
  • Maximum Output Current: 200mA
  • Dropout Voltage: 150mV (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122E721MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Low dropout voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • Small size allows for easy integration into compact designs
  • Low power consumption helps conserve energy
  • Stable and regulated output voltage ensures reliable performance of connected devices

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications
  • Narrow input voltage range restricts compatibility with certain systems

Working Principles

XC6122E721MR-G operates by comparing the output voltage with a reference voltage and adjusting the internal circuitry to maintain a constant output voltage. It utilizes a feedback mechanism to continuously monitor and regulate the voltage.

Detailed Application Field Plans

XC6122E721MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122E721MR-G are: - XC6206P182MR - LM1117IMPX-1.8/NOPB - MCP1700T-1802E/TT

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 275 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät XC6122E721MR-G :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of XC6122E721MR-G in technical solutions:

  1. Question: What is XC6122E721MR-G?
    - Answer: XC6122E721MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122E721MR-G?
    - Answer: The operating voltage range of XC6122E721MR-G is from 0.8V to 6.0V.

  3. Question: What is the output configuration of XC6122E721MR-G?
    - Answer: XC6122E721MR-G has an open-drain output configuration, which means it can be connected to other devices or circuits with a pull-up resistor.

  4. Question: What is the typical quiescent current consumption of XC6122E721MR-G?
    - Answer: The typical quiescent current consumption of XC6122E721MR-G is around 1.0µA, making it suitable for low-power applications.

  5. Question: How does XC6122E721MR-G detect voltage levels?
    - Answer: XC6122E721MR-G compares the input voltage with a fixed threshold voltage internally set within the IC. When the input voltage exceeds this threshold, the output goes low.

  6. Question: Can XC6122E721MR-G be used for undervoltage detection?
    - Answer: Yes, XC6122E721MR-G can be used for undervoltage detection. It triggers the output when the input voltage falls below the threshold voltage.

  7. Question: What is the hysteresis feature in XC6122E721MR-G?
    - Answer: XC6122E721MR-G has a built-in hysteresis feature that prevents output oscillation near the threshold voltage. It ensures stable operation and avoids false triggering.

  8. Question: What is the maximum voltage rating for XC6122E721MR-G?
    - Answer: The maximum voltage rating for XC6122E721MR-G is 6.5V. Exceeding this voltage may damage the IC.

  9. Question: Can XC6122E721MR-G be used in automotive applications?
    - Answer: Yes, XC6122E721MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive reliability standards.

  10. Question: Is XC6122E721MR-G available in different package options?
    - Answer: Yes, XC6122E721MR-G is available in various package options, including SOT-25, SNT-4A, and USP-4B, providing flexibility for different design requirements.

Please note that these answers are general and may vary depending on the specific application and usage scenario.