Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
XC6122F616MR-G

XC6122F616MR-G

Product Overview

Category

XC6122F616MR-G belongs to the category of voltage detectors.

Use

It is primarily used for monitoring and detecting voltage levels in electronic circuits.

Characteristics

  • Low power consumption
  • Wide operating voltage range
  • High accuracy
  • Small package size
  • Built-in delay circuitry

Package

XC6122F616MR-G is available in a small SOT-23-5 package.

Essence

The essence of XC6122F616MR-G lies in its ability to accurately monitor voltage levels and provide timely alerts when certain thresholds are exceeded or not met.

Packaging/Quantity

XC6122F616MR-G is typically packaged in reels, with each reel containing a specific quantity of voltage detectors.

Specifications

  • Operating Voltage Range: 1.6V to 6.0V
  • Detection Voltage Accuracy: ±1.0%
  • Quiescent Current: 1.0μA (typical)
  • Output Configuration: N-channel open drain
  • Delay Time: 200ms (typical)

Detailed Pin Configuration

XC6122F616MR-G has five pins arranged as follows:

```


| | --| |-- |____| ```

Pin 1: VDD - Power supply input
Pin 2: GND - Ground
Pin 3: OUT - Output signal
Pin 4: NC - No connection
Pin 5: EN - Enable pin

Functional Features

  • Overvoltage detection
  • Undervoltage detection
  • Built-in hysteresis
  • Power-on reset function
  • Low power consumption
  • Wide operating voltage range

Advantages and Disadvantages

Advantages

  • Accurate voltage monitoring
  • Low power consumption
  • Wide operating voltage range
  • Small package size

Disadvantages

  • Limited number of pins for additional functionality
  • Lack of adjustable detection thresholds

Working Principles

XC6122F616MR-G operates by comparing the input voltage with a reference voltage. When the input voltage exceeds or falls below the specified threshold, the output signal changes state, indicating the detected condition.

Detailed Application Field Plans

XC6122F616MR-G finds applications in various electronic devices and systems, including: - Battery-powered devices - Power management circuits - Industrial control systems - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to XC6122F616MR-G include: - XC6122F616ML-G - XC6122F616MR-GP - XC6122F616ML-GP - XC6122F616MR-GX - XC6122F616ML-GX

These models offer similar functionality but may differ in terms of package type, operating temperature range, or other specifications.

Word count: 314 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät XC6122F616MR-G :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of XC6122F616MR-G in technical solutions:

  1. Question: What is XC6122F616MR-G?
    - Answer: XC6122F616MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122F616MR-G?
    - Answer: The operating voltage range of XC6122F616MR-G is from 0.6V to 6.0V.

  3. Question: What is the output type of XC6122F616MR-G?
    - Answer: XC6122F616MR-G has an open-drain output type, which means it can be connected to other devices or circuits to indicate the status of the monitored voltage.

  4. Question: What is the typical quiescent current consumption of XC6122F616MR-G?
    - Answer: The typical quiescent current consumption of XC6122F616MR-G is very low, usually around 1.0µA.

  5. Question: How accurate is XC6122F616MR-G in detecting voltage levels?
    - Answer: XC6122F616MR-G has a high accuracy of ±1.0% in detecting voltage levels, ensuring reliable monitoring of power supply voltages.

  6. Question: Can XC6122F616MR-G be used in battery-powered applications?
    - Answer: Yes, XC6122F616MR-G is suitable for battery-powered applications due to its low quiescent current consumption, which helps conserve battery life.

  7. Question: Does XC6122F616MR-G have built-in hysteresis?
    - Answer: Yes, XC6122F616MR-G has built-in hysteresis, which helps prevent false triggering and ensures stable voltage monitoring.

  8. Question: What is the temperature range in which XC6122F616MR-G can operate?
    - Answer: XC6122F616MR-G can operate within a wide temperature range of -40°C to +85°C, making it suitable for various environmental conditions.

  9. Question: Can XC6122F616MR-G be used in automotive applications?
    - Answer: Yes, XC6122F616MR-G is AEC-Q100 qualified, making it suitable for automotive applications where reliable voltage monitoring is required.

  10. Question: Are there any additional features or protections provided by XC6122F616MR-G?
    - Answer: Yes, XC6122F616MR-G includes features like overcurrent protection, reverse current blocking, and a power-on reset function, enhancing its reliability and usability in technical solutions.

Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.