XC6123D639MR-G
Product Overview
Category
XC6123D639MR-G belongs to the category of voltage regulators.
Use
It is commonly used for regulating voltage in electronic circuits.
Characteristics
- Compact size
- High efficiency
- Low dropout voltage
- Wide input voltage range
- Overcurrent protection
- Thermal shutdown protection
Package
XC6123D639MR-G is available in a small surface-mount package.
Essence
The essence of XC6123D639MR-G lies in its ability to regulate voltage efficiently and reliably in various electronic applications.
Packaging/Quantity
XC6123D639MR-G is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 3.3V
- Output Current: 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 40μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6123D639MR-G has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
Functional Features
- Voltage regulation: XC6123D639MR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: It safeguards the circuit by limiting the output current to prevent damage.
- Thermal shutdown protection: In case of excessive temperature, the regulator shuts down to avoid overheating.
Advantages and Disadvantages
Advantages
- Small form factor allows for space-saving designs.
- High efficiency results in minimal power loss.
- Wide input voltage range makes it versatile for various applications.
- Overcurrent and thermal protection enhance reliability.
Disadvantages
- Limited output current may not be suitable for high-power applications.
- Dropout voltage may affect performance in low input voltage scenarios.
Working Principles
XC6123D639MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage.
Detailed Application Field Plans
XC6123D639MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6123D639MR-G are: - XC6206P332MR - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.
In conclusion, XC6123D639MR-G is a compact and efficient voltage regulator with a wide range of applications. Its features such as overcurrent protection and thermal shutdown make it a reliable choice for various electronic circuits. However, its limited output current and dropout voltage should be taken into consideration when selecting it for specific applications.
Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät XC6123D639MR-G :n soveltamiseen teknisissä ratkaisuissa
Sure! Here are 10 common questions and answers related to the application of XC6123D639MR-G in technical solutions:
Question: What is XC6123D639MR-G?
- Answer: XC6123D639MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.Question: What is the operating voltage range of XC6123D639MR-G?
- Answer: The operating voltage range of XC6123D639MR-G is typically between 0.7V and 6.0V.Question: How does XC6123D639MR-G help in technical solutions?
- Answer: XC6123D639MR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level. This ensures proper system initialization and prevents data corruption.Question: What is the output type of XC6123D639MR-G?
- Answer: XC6123D639MR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve the desired logic level.Question: What is the typical reset threshold voltage of XC6123D639MR-G?
- Answer: The typical reset threshold voltage of XC6123D639MR-G is 3.9V.Question: Can XC6123D639MR-G be used in battery-powered applications?
- Answer: Yes, XC6123D639MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.Question: Does XC6123D639MR-G have a built-in delay circuit?
- Answer: Yes, XC6123D639MR-G has a built-in delay circuit that ensures a stable reset signal is provided for a specified duration (typically 200ms) after the power supply voltage rises above the threshold.Question: What is the package type of XC6123D639MR-G?
- Answer: XC6123D639MR-G is available in a small SOT-23-5 package, which is compact and suitable for space-constrained applications.Question: Can XC6123D639MR-G be used in automotive applications?
- Answer: Yes, XC6123D639MR-G is AEC-Q100 qualified and can be used in automotive applications where reliable voltage monitoring and reset functionality are required.Question: Are there any application notes or reference designs available for XC6123D639MR-G?
- Answer: Yes, the manufacturer provides application notes and reference designs that can help in understanding and implementing XC6123D639MR-G in various technical solutions. These resources can be found on the manufacturer's website or by contacting their technical support team.