Torex Semiconductor Ltd
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
XC6124A717MR-G
Näytä Yksityiskohdat DataSheets

XC6124A717MR-G

Product Overview

Category

XC6124A717MR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Low dropout voltage
  • High output voltage accuracy
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6124A717MR-G is available in a small SOT-23-5 package.

Essence

The essence of XC6124A717MR-G lies in its ability to regulate voltage efficiently and accurately.

Packaging/Quantity

It is typically packaged in reels, with 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.8V
  • Dropout Voltage: 200mV @ 100mA
  • Quiescent Current: 30µA
  • Output Current: 150mA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124A717MR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. NC (No Connection)
  4. VOUT (Output Voltage)
  5. EN (Enable)

Functional Features

  • Low dropout voltage ensures efficient regulation even with low input voltages.
  • High output voltage accuracy provides precise voltage regulation.
  • Low quiescent current minimizes power consumption when the regulator is idle.
  • Overcurrent protection safeguards the circuit from excessive current flow.
  • Thermal shutdown protection prevents damage due to overheating.

Advantages and Disadvantages

Advantages

  • Efficient voltage regulation
  • Accurate output voltage
  • Low power consumption
  • Protection against overcurrent and overheating

Disadvantages

  • Limited output current capacity (150mA)

Working Principles

XC6124A717MR-G operates based on the principle of a linear voltage regulator. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. The internal circuitry monitors the input and output voltages, ensuring that the desired output voltage is maintained within specified limits.

Detailed Application Field Plans

XC6124A717MR-G finds applications in various electronic devices and circuits where precise voltage regulation is required. Some potential application fields include:

  1. Battery-powered devices: XC6124A717MR-G can be used in portable electronic devices such as smartphones, tablets, and wearable devices to ensure stable voltage supply.
  2. IoT devices: It is suitable for powering sensors, microcontrollers, and communication modules in Internet of Things (IoT) applications.
  3. Automotive electronics: XC6124A717MR-G can be utilized in automotive systems, providing regulated voltage for various components like infotainment systems, lighting, and control modules.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6124A717MR-G are:

  1. LM1117-1.8: A popular voltage regulator with a fixed 1.8V output voltage.
  2. MCP1700-1802E/TO: Another low dropout voltage regulator with a fixed 1.8V output.
  3. TS2937CP-1.8: A voltage regulator with a 1.8V fixed output and overcurrent protection.

These alternative models can be considered based on specific requirements and availability.

Word count: 413 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät XC6124A717MR-G :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of XC6124A717MR-G in technical solutions:

  1. Question: What is XC6124A717MR-G?
    - Answer: XC6124A717MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used in various technical solutions.

  2. Question: What is the operating voltage range of XC6124A717MR-G?
    - Answer: The operating voltage range of XC6124A717MR-G is typically between 0.7V and 6.0V.

  3. Question: What is the purpose of XC6124A717MR-G in technical solutions?
    - Answer: XC6124A717MR-G is primarily used as a voltage monitoring and detection component in electronic circuits. It helps ensure stable operation by detecting when the voltage exceeds or falls below a certain threshold.

  4. Question: How does XC6124A717MR-G detect voltage levels?
    - Answer: XC6124A717MR-G uses an internal voltage reference and a comparator to compare the input voltage with a preset threshold. When the input voltage crosses this threshold, it triggers an output signal.

  5. Question: Can XC6124A717MR-G be used in battery-powered applications?
    - Answer: Yes, XC6124A717MR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.

  6. Question: What is the output configuration of XC6124A717MR-G?
    - Answer: XC6124A717MR-G has an open-drain output configuration, which means it requires an external pull-up resistor to provide a logic-level output signal.

  7. Question: What is the typical accuracy of XC6124A717MR-G?
    - Answer: The typical accuracy of XC6124A717MR-G is ±1.5% at room temperature.

  8. Question: Can XC6124A717MR-G be used in automotive applications?
    - Answer: Yes, XC6124A717MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  9. Question: Does XC6124A717MR-G have built-in hysteresis?
    - Answer: Yes, XC6124A717MR-G has a built-in hysteresis feature that helps prevent output oscillation near the threshold voltage.

  10. Question: What is the package type of XC6124A717MR-G?
    - Answer: XC6124A717MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications or application requirements.