Torex Semiconductor Ltd
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
XC6124C232MG-G
Näytä Yksityiskohdat DataSheets

XC6124C232MG-G

Product Overview

Category

XC6124C232MG-G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • High efficiency
  • Low power consumption

Package

XC6124C232MG-G is available in a small form factor package, which makes it suitable for space-constrained applications.

Essence

The essence of XC6124C232MG-G lies in its ability to regulate and manage voltage effectively, ensuring stable and reliable power supply to electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Maximum Output Current: 200mA
  • Dropout Voltage: 150mV @ 100mA
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124C232MG-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • Voltage regulation: XC6124C232MG-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: The IC incorporates overcurrent protection to safeguard connected devices.
  • Thermal shutdown: In case of excessive temperature, the IC shuts down to prevent damage.
  • Low quiescent current: The low quiescent current ensures minimal power consumption during standby mode.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into various electronic devices.
  • High efficiency results in minimal power loss during voltage regulation.
  • Wide input and output voltage ranges provide flexibility in different applications.
  • Overcurrent protection enhances the safety of connected devices.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the IC.

Working Principles

XC6124C232MG-G utilizes a combination of internal circuitry, feedback mechanisms, and control logic to regulate the output voltage. It continuously monitors the input voltage and adjusts its internal components to maintain a stable output voltage within the specified range.

Detailed Application Field Plans

XC6124C232MG-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6124C232MG-G are: - XC6124C332MG-G - XC6124C432MG-G - XC6124C532MG-G - XC6124C632MG-G

These models have slightly different specifications and pin configurations, allowing users to choose the most suitable option based on their specific requirements.

Word count: 420 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät XC6124C232MG-G :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of XC6124C232MG-G in technical solutions:

  1. Q: What is XC6124C232MG-G? A: XC6124C232MG-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6124C232MG-G? A: The operating voltage range of XC6124C232MG-G is typically between 0.8V and 6.0V.

  3. Q: How does XC6124C232MG-G work? A: XC6124C232MG-G continuously monitors the input voltage and provides a reset signal when the voltage falls below a certain threshold. This can be used to trigger actions or protect sensitive components during power fluctuations.

  4. Q: What is the output type of XC6124C232MG-G? A: XC6124C232MG-G has an open-drain output, which means it can be connected to other devices with different voltage levels.

  5. Q: What is the typical quiescent current consumption of XC6124C232MG-G? A: The typical quiescent current consumption of XC6124C232MG-G is very low, usually around 1.0µA.

  6. Q: Can XC6124C232MG-G be used in battery-powered applications? A: Yes, XC6124C232MG-G is suitable for battery-powered applications due to its low quiescent current consumption.

  7. Q: What is the accuracy of the voltage detection threshold in XC6124C232MG-G? A: The voltage detection threshold accuracy of XC6124C232MG-G is typically ±1.5%.

  8. Q: Can XC6124C232MG-G be used in automotive applications? A: Yes, XC6124C232MG-G is designed to meet the requirements of automotive applications and can operate within the specified temperature range.

  9. Q: Does XC6124C232MG-G have built-in hysteresis? A: Yes, XC6124C232MG-G has a built-in hysteresis feature that helps prevent oscillation or false triggering near the detection threshold.

  10. Q: What package does XC6124C232MG-G come in? A: XC6124C232MG-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.