Torex Semiconductor Ltd
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
XC6124C332ER-G
Näytä Yksityiskohdat DataSheets

XC6124C332ER-G

Product Overview

Category

XC6124C332ER-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Small size and lightweight
  • Low power consumption
  • High precision voltage regulation
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6124C332ER-G is available in a compact SOT-23-5 package.

Essence

The essence of XC6124C332ER-G lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

It is typically packaged in reels, with each reel containing a specific quantity of XC6124C332ER-G units.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 150mA (maximum)
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124C332ER-G has five pins arranged as follows:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. NC: No connection pin
  5. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6124C332ER-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the circuit by limiting the output current within safe limits.
  • Thermal shutdown protection: In case of excessive temperature, the regulator shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into space-constrained designs.
  • Low power consumption helps in energy-efficient applications.
  • Wide input voltage range makes it compatible with various power sources.
  • Overcurrent and thermal shutdown protection enhance circuit reliability.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage can cause a slight voltage drop across the regulator.

Working Principles

XC6124C332ER-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. The enable pin allows for easy on/off control of the regulator.

Detailed Application Field Plans

XC6124C332ER-G finds applications in various electronic devices, including but not limited to: 1. Battery-powered devices 2. Portable consumer electronics 3. IoT devices 4. Wearable devices 5. Embedded systems

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6124C332ER-G are: 1. LM1117-3.3: A popular linear voltage regulator with a fixed 3.3V output. 2. AP2112-3.3: Another compact and low-dropout voltage regulator suitable for 3.3V applications. 3. MCP1700-3302E: A low quiescent current LDO regulator with a 3.3V output.

These alternative models can be considered based on specific requirements and design constraints.

Word count: 411

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät XC6124C332ER-G :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of XC6124C332ER-G in technical solutions:

  1. Question: What is XC6124C332ER-G?
    Answer: XC6124C332ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6124C332ER-G?
    Answer: The operating voltage range of XC6124C332ER-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6124C332ER-G work?
    Answer: XC6124C332ER-G works by continuously monitoring the input voltage and comparing it to a preset threshold. When the input voltage falls below the threshold, an internal reset signal is generated.

  4. Question: What is the purpose of using XC6124C332ER-G in technical solutions?
    Answer: XC6124C332ER-G is commonly used as a power supply monitoring and reset circuit in various applications, such as microcontrollers, digital cameras, portable devices, and automotive electronics.

  5. Question: Can XC6124C332ER-G be used with different voltage levels?
    Answer: Yes, XC6124C332ER-G can be used with different voltage levels by selecting the appropriate threshold voltage version. It is available in various versions with different threshold voltages.

  6. Question: What is the output type of XC6124C332ER-G?
    Answer: XC6124C332ER-G has an open-drain output type, which means it can be connected to other devices through a pull-up resistor to achieve different logic levels.

  7. Question: Does XC6124C332ER-G have any built-in delay function?
    Answer: Yes, XC6124C332ER-G has a built-in delay function that helps prevent false reset signals during power-up or voltage fluctuations. The delay time is typically around 200ms.

  8. Question: Can XC6124C332ER-G be used in battery-powered applications?
    Answer: Yes, XC6124C332ER-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA, making it suitable for power-sensitive designs.

  9. Question: Is XC6124C332ER-G available in different package options?
    Answer: Yes, XC6124C332ER-G is available in various package options, including SOT-23-5 and USP-6B, providing flexibility for different PCB layouts and space constraints.

  10. Question: Are there any application notes or reference designs available for XC6124C332ER-G?
    Answer: Yes, Torex Semiconductor provides application notes and reference designs for XC6124C332ER-G, which can help designers understand its usage and optimize its performance in specific applications.

Please note that the answers provided here are general and may vary depending on the specific requirements and datasheet of XC6124C332ER-G.