Torex Semiconductor Ltd
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
XC6124C545MR-G
Näytä Yksityiskohdat DataSheets

XC6124C545MR-G

Product Overview

Category

XC6124C545MR-G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • High efficiency

Package

XC6124C545MR-G is available in a small form factor package, typically a surface mount technology (SMT) package.

Essence

The essence of XC6124C545MR-G lies in its ability to regulate voltage and manage power efficiently in electronic devices.

Packaging/Quantity

This product is usually packaged in reels or tape and reel packaging, with a specific quantity per reel.

Specifications

The specifications of XC6124C545MR-G are as follows:

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 5.45V
  • Output Current: Up to 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124C545MR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

The functional features of XC6124C545MR-G include:

  • Voltage regulation: It ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the circuit from excessive current flow.
  • Thermal shutdown: It prevents overheating by shutting down the device when the temperature exceeds a certain threshold.
  • Low quiescent current: It minimizes power consumption during standby mode.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into small electronic devices.
  • High efficiency results in minimal power loss during voltage regulation.
  • Wide input voltage range provides flexibility in various applications.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage of 200mV may affect the overall efficiency in low input voltage scenarios.

Working Principles

XC6124C545MR-G operates based on a voltage regulation principle known as a linear regulator. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. This ensures that the connected electronic device receives a consistent and regulated power supply.

Detailed Application Field Plans

XC6124C545MR-G finds applications in various electronic devices, including but not limited to:

  1. Mobile phones
  2. Portable media players
  3. Wearable devices
  4. IoT devices
  5. Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models to XC6124C545MR-G that offer similar functionality include:

  1. XC6206P545MR-G
  2. LM1117IMPX-5.45/NOPB
  3. MCP1700T-5452E/TT

These alternatives can be considered based on specific requirements and availability.

Word count: 346 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät XC6124C545MR-G :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of XC6124C545MR-G in technical solutions:

  1. Q: What is XC6124C545MR-G? A: XC6124C545MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6124C545MR-G? A: The operating voltage range of XC6124C545MR-G is typically between 0.8V and 6.0V.

  3. Q: How does XC6124C545MR-G help in technical solutions? A: XC6124C545MR-G helps in technical solutions by providing a reliable way to monitor the power supply voltage and initiate a reset or shutdown sequence when the voltage falls outside the desired range.

  4. Q: Can XC6124C545MR-G be used in battery-powered applications? A: Yes, XC6124C545MR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.

  5. Q: What is the typical reset voltage threshold of XC6124C545MR-G? A: The typical reset voltage threshold of XC6124C545MR-G is 4.5V.

  6. Q: Is XC6124C545MR-G available in different package options? A: Yes, XC6124C545MR-G is available in various package options, including SOT-25 and USP-4B.

  7. Q: Can XC6124C545MR-G be used in automotive applications? A: Yes, XC6124C545MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  8. Q: Does XC6124C545MR-G have built-in hysteresis? A: Yes, XC6124C545MR-G has built-in hysteresis to prevent oscillation and ensure stable operation.

  9. Q: What is the maximum supply voltage that XC6124C545MR-G can handle? A: The maximum supply voltage that XC6124C545MR-G can handle is 6.5V.

  10. Q: Can XC6124C545MR-G be used in industrial control systems? A: Yes, XC6124C545MR-G is suitable for industrial control systems as it provides reliable voltage monitoring and reset functionality.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of XC6124C545MR-G.