Torex Semiconductor Ltd
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
XC6124C640ER-G
Näytä Yksityiskohdat DataSheets

XC6124C640ER-G

Product Overview

Category

XC6124C640ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Package: ER-G package
  • Essence: Voltage regulator IC
  • Packaging/Quantity: Available in tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

The specifications of XC6124C640ER-G are as follows:

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Output Current: 150mA (max)
  • Dropout Voltage: 160mV (typ)
  • Quiescent Current: 30µA (typ)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The pin configuration of XC6124C640ER-G is as follows:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

XC6124C640ER-G offers the following functional features:

  • Low dropout voltage
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages: - Low dropout voltage ensures efficient voltage regulation. - Low quiescent current minimizes power consumption. - Overcurrent, thermal shutdown, and short-circuit protections enhance reliability.

Disadvantages: - Limited output current capacity (150mA max).

Working Principles

XC6124C640ER-G operates based on the principle of voltage regulation. It takes an input voltage within the specified range and provides a regulated output voltage. The internal circuitry of the IC ensures stable voltage output even with varying input voltages.

Detailed Application Field Plans

XC6124C640ER-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124C640ER-G are: - XC6206P332MR-G - XC6220B332MR-G - XC6219B332MR-G - XC6221B332MR-G - XC6223B332MR-G

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 274 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät XC6124C640ER-G :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of XC6124C640ER-G in technical solutions:

  1. Question: What is XC6124C640ER-G?
    - Answer: XC6124C640ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6124C640ER-G?
    - Answer: The operating voltage range of XC6124C640ER-G is from 0.6V to 6.0V.

  3. Question: What is the output type of XC6124C640ER-G?
    - Answer: XC6124C640ER-G has an open-drain output type, which means it can be connected to other devices or circuits with a pull-up resistor.

  4. Question: What is the typical quiescent current consumption of XC6124C640ER-G?
    - Answer: The typical quiescent current consumption of XC6124C640ER-G is very low, typically around 1.0µA.

  5. Question: Can XC6124C640ER-G detect both overvoltage and undervoltage conditions?
    - Answer: No, XC6124C640ER-G is specifically designed to detect undervoltage conditions only.

  6. Question: What is the accuracy of the detection voltage threshold in XC6124C640ER-G?
    - Answer: The accuracy of the detection voltage threshold in XC6124C640ER-G is ±1.5%.

  7. Question: How does XC6124C640ER-G indicate the detection status?
    - Answer: XC6124C640ER-G has an open-drain output pin that pulls low when the voltage drops below the detection threshold, indicating an undervoltage condition.

  8. Question: Can XC6124C640ER-G be used in battery-powered applications?
    - Answer: Yes, XC6124C640ER-G is suitable for battery-powered applications due to its low quiescent current consumption.

  9. Question: What is the temperature range of operation for XC6124C640ER-G?
    - Answer: XC6124C640ER-G can operate within a temperature range of -40°C to +85°C.

  10. Question: Is XC6124C640ER-G available in different package options?
    - Answer: Yes, XC6124C640ER-G is available in various package options, including SOT-25 and USP-6B.

Please note that these answers are based on general information about XC6124C640ER-G and may vary depending on specific datasheet specifications or application requirements.