XC6124C722MR-G
Introduction
The XC6124C722MR-G is a voltage regulator belonging to the category of electronic components used for regulating voltage in various electronic circuits. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
Basic Information Overview
- Category: Voltage Regulator
- Use: Regulating voltage in electronic circuits
- Characteristics: High precision, low dropout voltage, low quiescent current
- Package: SOT-23-5
- Essence: Efficient voltage regulation
- Packaging/Quantity: Tape & Reel, 3000 units per reel
Specifications
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage Range: 1.2V to 5.0V
- Output Current: 300mA
- Dropout Voltage: 160mV @ 100mA
- Quiescent Current: 30μA (typical)
Detailed Pin Configuration
The XC6124C722MR-G has a standard SOT-23-5 package with the following pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. NC (No Connection) 4. VOUT (Output Voltage) 5. EN (Enable)
Functional Features
- Low Dropout Voltage: Ensures stable output even with small input-output differentials
- Low Quiescent Current: Minimizes power consumption in standby mode
- Short Circuit Protection: Safeguards the regulator and connected circuitry from damage
Advantages and Disadvantages
Advantages
- High precision voltage regulation
- Small form factor
- Low dropout voltage
- Low quiescent current
Disadvantages
- Limited maximum output current
- Sensitive to input voltage fluctuations
Working Principles
The XC6124C722MR-G operates by comparing the reference voltage with the feedback voltage to adjust the pass transistor's resistance, thereby maintaining a stable output voltage despite variations in the input voltage.
Detailed Application Field Plans
The XC6124C722MR-G is suitable for various applications, including: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable technology - Industrial control systems
Detailed and Complete Alternative Models
Some alternative models to the XC6124C722MR-G include: - XC6206P332MR-G - XC6221B332MR-G - XC6210B182MR-G - XC6221C182MR-G
In conclusion, the XC6124C722MR-G is a versatile voltage regulator with high precision and efficiency, making it suitable for a wide range of electronic applications.
Word Count: 386
Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät XC6124C722MR-G :n soveltamiseen teknisissä ratkaisuissa
What is the input voltage range for XC6124C722MR-G?
- The input voltage range for XC6124C722MR-G is 2.5V to 6.0V.
What is the output voltage of XC6124C722MR-G?
- The output voltage of XC6124C722MR-G is fixed at 3.3V.
What is the maximum output current of XC6124C722MR-G?
- The maximum output current of XC6124C722MR-G is 150mA.
What is the dropout voltage of XC6124C722MR-G?
- The dropout voltage of XC6124C722MR-G is typically 160mV at 100mA load.
Is XC6124C722MR-G suitable for battery-powered applications?
- Yes, XC6124C722MR-G is suitable for battery-powered applications due to its low dropout voltage and low quiescent current.
Does XC6124C722MR-G have built-in overcurrent protection?
- Yes, XC6124C722MR-G has built-in overcurrent protection to safeguard the device and the load.
What is the operating temperature range of XC6124C722MR-G?
- The operating temperature range of XC6124C722MR-G is -40°C to 85°C.
Can XC6124C722MR-G be used in automotive applications?
- Yes, XC6124C722MR-G is suitable for automotive applications as it meets the necessary quality and reliability standards.
Does XC6124C722MR-G require external capacitors for stability?
- No, XC6124C722MR-G does not require external capacitors for stability, which simplifies the design.
Is XC6124C722MR-G available in a small package for space-constrained applications?
- Yes, XC6124C722MR-G is available in a small SOT-25 package, making it suitable for space-constrained applications.