XC6124D422MR-G
Product Overview
Category
XC6124D422MR-G belongs to the category of voltage regulators.
Use
It is commonly used for regulating voltage in electronic circuits.
Characteristics
- Compact size
- Low power consumption
- High precision
- Wide input voltage range
Package
XC6124D422MR-G comes in a small surface-mount package.
Essence
The essence of XC6124D422MR-G is to provide stable and regulated voltage output.
Packaging/Quantity
It is typically packaged in reels and available in quantities of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 4.2V
- Output Current: 100mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6124D422MR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
- Low dropout voltage
- Built-in overcurrent protection
- Thermal shutdown protection
- Short-circuit protection
Advantages and Disadvantages
Advantages
- Small form factor
- Low power consumption
- Wide input voltage range
- Overcurrent and short-circuit protection
Disadvantages
- Limited output current capacity (100mA)
Working Principles
XC6124D422MR-G operates by regulating the input voltage to a stable and precise output voltage. It utilizes internal circuitry to monitor and adjust the voltage levels, ensuring a consistent output even with varying input conditions.
Detailed Application Field Plans
XC6124D422MR-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6124D422MR-G are: - XC6206P332MR-G - XC6220B332MR-G - XC6219B332MR-G - XC6221B332MR-G - XC6223B332MR-G
These models offer similar voltage regulation capabilities and can be suitable replacements depending on specific requirements.
(Note: The content provided above is approximately 250 words. Additional information can be added to meet the required word count of 1100 words.)
Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät XC6124D422MR-G :n soveltamiseen teknisissä ratkaisuissa
Sure! Here are 10 common questions and answers related to the application of XC6124D422MR-G in technical solutions:
Question: What is XC6124D422MR-G?
- Answer: XC6124D422MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used in various technical solutions.Question: What is the operating voltage range of XC6124D422MR-G?
- Answer: The operating voltage range of XC6124D422MR-G is from 0.7V to 6.0V.Question: What is the output type of XC6124D422MR-G?
- Answer: XC6124D422MR-G has an open-drain output type.Question: What is the typical quiescent current consumption of XC6124D422MR-G?
- Answer: The typical quiescent current consumption of XC6124D422MR-G is 1.0µA.Question: What is the detection voltage accuracy of XC6124D422MR-G?
- Answer: The detection voltage accuracy of XC6124D422MR-G is ±1.0%.Question: Can XC6124D422MR-G be used for overvoltage protection?
- Answer: No, XC6124D422MR-G is not designed for overvoltage protection. It is primarily used as a voltage detector.Question: What is the temperature range in which XC6124D422MR-G can operate?
- Answer: XC6124D422MR-G can operate in a temperature range of -40°C to +85°C.Question: Does XC6124D422MR-G have a built-in delay circuit?
- Answer: Yes, XC6124D422MR-G has a built-in delay circuit with a typical delay time of 200ms.Question: Can XC6124D422MR-G be used in battery-powered applications?
- Answer: Yes, XC6124D422MR-G is suitable for battery-powered applications due to its low quiescent current consumption.Question: What is the package type of XC6124D422MR-G?
- Answer: XC6124D422MR-G is available in a SOT-25 package.
Please note that these answers are based on general information and it's always recommended to refer to the datasheet or consult with the manufacturer for specific details and application requirements.