Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
XC6124D626MR-G

XC6124D626MR-G

Product Overview

Category

XC6124D626MR-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize the voltage in electronic circuits.

Characteristics

  • Small size
  • Low power consumption
  • High precision
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6124D626MR-G comes in a small surface-mount package.

Essence

The essence of XC6124D626MR-G is to provide a stable and regulated voltage supply to electronic devices.

Packaging/Quantity

XC6124D626MR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124D626MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • Voltage regulation: XC6124D626MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the circuit by limiting the output current in case of excessive load.
  • Thermal shutdown protection: It prevents overheating by shutting down the regulator when the temperature exceeds a certain threshold.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into space-constrained designs.
  • Low power consumption helps conserve energy.
  • High precision ensures accurate voltage regulation.
  • Wide input voltage range provides flexibility in various applications.

Disadvantages

  • Limited output current may not be suitable for high-power devices.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6124D626MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for any variations in the input voltage or load conditions.

Detailed Application Field Plans

XC6124D626MR-G finds applications in various electronic devices and systems, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable devices - Industrial automation - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124D626MR-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar functionality and specifications, providing options for different design requirements.

In conclusion, XC6124D626MR-G is a compact voltage regulator with high precision and low power consumption. It offers stable voltage regulation and protection features, making it suitable for a wide range of electronic applications.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät XC6124D626MR-G :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of XC6124D626MR-G in technical solutions:

  1. Question: What is XC6124D626MR-G?
    Answer: XC6124D626MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level in electronic circuits.

  2. Question: What is the operating voltage range of XC6124D626MR-G?
    Answer: The operating voltage range of XC6124D626MR-G is from 0.6V to 6.0V.

  3. Question: How does XC6124D626MR-G work?
    Answer: XC6124D626MR-G continuously monitors the input voltage and provides a reset signal when the voltage drops below a certain threshold.

  4. Question: What is the typical voltage threshold for XC6124D626MR-G?
    Answer: The typical voltage threshold for XC6124D626MR-G is 2.6V.

  5. Question: Can XC6124D626MR-G be used in battery-powered applications?
    Answer: Yes, XC6124D626MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Question: What is the output type of XC6124D626MR-G?
    Answer: XC6124D626MR-G has an open-drain output type, which allows it to be easily interfaced with other digital circuits.

  7. Question: Is XC6124D626MR-G suitable for automotive applications?
    Answer: Yes, XC6124D626MR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  8. Question: Can XC6124D626MR-G be used for power-on reset applications?
    Answer: Yes, XC6124D626MR-G is commonly used for power-on reset applications to ensure proper initialization of microcontrollers and other digital devices.

  9. Question: What is the temperature range for XC6124D626MR-G?
    Answer: The temperature range for XC6124D626MR-G is from -40°C to +85°C.

  10. Question: Are there any additional features of XC6124D626MR-G?
    Answer: Yes, XC6124D626MR-G has built-in hysteresis, which helps to prevent output oscillation near the threshold voltage and provides stable operation.

Please note that these answers are based on general information about XC6124D626MR-G and may vary depending on specific application requirements.