Torex Semiconductor Ltd
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
XC6124E416MR-G
Näytä Yksityiskohdat DataSheets

XC6124E416MR-G

Product Overview

Category

XC6124E416MR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.

Characteristics

  • Voltage regulation: XC6124E416MR-G provides a stable output voltage regardless of input voltage fluctuations.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
  • Low quiescent current: The regulator consumes minimal current when no load is connected.
  • Thermal shutdown protection: It automatically shuts down to prevent damage due to excessive heat.
  • Short-circuit protection: It safeguards against short-circuits, preventing damage to the regulator and other components.

Package

XC6124E416MR-G is available in a small form factor package, making it suitable for space-constrained applications.

Essence

The essence of XC6124E416MR-G lies in its ability to provide stable and regulated voltage to ensure proper functioning of electronic devices.

Packaging/Quantity

XC6124E416MR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input voltage range: 2.5V - 6.0V
  • Output voltage: 1.8V
  • Maximum output current: 100mA
  • Dropout voltage: 200mV (typical)
  • Quiescent current: 30μA (typical)
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

XC6124E416MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: Maintains a constant output voltage despite input voltage variations.
  • Low dropout voltage: Operates efficiently even with a small difference between input and output voltages.
  • Low quiescent current: Consumes minimal current when no load is connected, conserving power.
  • Thermal shutdown protection: Automatically shuts down to prevent damage from excessive heat.
  • Short-circuit protection: Safeguards against short-circuits, protecting the regulator and other components.

Advantages and Disadvantages

Advantages

  • Stable and regulated output voltage.
  • Efficient operation with low dropout voltage.
  • Minimal power consumption in standby mode.
  • Protection against thermal overload and short-circuits.

Disadvantages

  • Limited maximum output current (100mA).
  • Restricted input voltage range (2.5V - 6.0V).

Working Principles

XC6124E416MR-G utilizes internal circuitry to compare the output voltage with a reference voltage. It adjusts the pass transistor's resistance to maintain a constant output voltage. The regulator continuously monitors the input voltage and makes necessary adjustments to ensure stable output voltage.

Detailed Application Field Plans

XC6124E416MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124E416MR-G are: - LM1117-1.8V: A popular voltage regulator with similar specifications. - MCP1700-1802E/TO: Another option for stable voltage regulation. - TS2937CZ-1.8: A low dropout voltage regulator suitable for various applications.

These alternative models offer similar functionality and can be used as replacements based on specific requirements.

Word count: 440 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät XC6124E416MR-G :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of XC6124E416MR-G in technical solutions:

  1. Question: What is XC6124E416MR-G?
    - Answer: XC6124E416MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6124E416MR-G?
    - Answer: The operating voltage range of XC6124E416MR-G is from 0.8V to 6.0V.

  3. Question: What is the output type of XC6124E416MR-G?
    - Answer: XC6124E416MR-G has an open-drain output type, which means it can be connected to other devices or circuits with different voltage levels.

  4. Question: What is the typical quiescent current consumption of XC6124E416MR-G?
    - Answer: The typical quiescent current consumption of XC6124E416MR-G is very low, around 1.0µA.

  5. Question: How does XC6124E416MR-G detect voltage levels?
    - Answer: XC6124E416MR-G uses a built-in voltage reference and comparator to detect when the input voltage exceeds a certain threshold level.

  6. Question: Can XC6124E416MR-G be used for undervoltage detection?
    - Answer: Yes, XC6124E416MR-G can be used for both overvoltage and undervoltage detection by setting the appropriate threshold voltage.

  7. Question: What is the accuracy of the voltage detection in XC6124E416MR-G?
    - Answer: The accuracy of voltage detection in XC6124E416MR-G is typically ±1.5%.

  8. Question: Can XC6124E416MR-G be used in battery-powered applications?
    - Answer: Yes, XC6124E416MR-G is suitable for battery-powered applications due to its low quiescent current consumption.

  9. Question: Does XC6124E416MR-G have any built-in protection features?
    - Answer: Yes, XC6124E416MR-G has built-in hysteresis and a delay circuit to prevent false triggering and ensure stable operation.

  10. Question: What is the package type of XC6124E416MR-G?
    - Answer: XC6124E416MR-G is available in a small SOT-25 package, which is compact and easy to integrate into various electronic designs.

Please note that these answers are general and may vary depending on the specific application and requirements.