Torex Semiconductor Ltd
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
XC6124E446ER-G
Näytä Yksityiskohdat DataSheets

XC6124E446ER-G

Product Overview

Category

XC6124E446ER-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize voltage levels in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short circuit protection

Package

XC6124E446ER-G is available in a small SOT-23-5 package.

Essence

The essence of XC6124E446ER-G is to provide stable and regulated voltage output for electronic devices.

Packaging/Quantity

XC6124E446ER-G is typically packaged in reels, with 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.0V
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 40μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124E446ER-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. NC: No connection pin
  5. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6124E446ER-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Low dropout voltage: It minimizes power loss and improves efficiency.
  • Low quiescent current: It consumes minimal current when not actively regulating voltage.
  • Thermal shutdown protection: It shuts down automatically to prevent damage from excessive heat.
  • Short circuit protection: It safeguards against damage caused by short circuits.

Advantages and Disadvantages

Advantages

  • High precision voltage regulation ensures reliable performance.
  • Low dropout voltage improves efficiency.
  • Low quiescent current prolongs battery life.
  • Thermal shutdown protection prevents overheating.
  • Short circuit protection enhances safety.

Disadvantages

  • Limited input and output voltage ranges may not be suitable for all applications.
  • SOT-23-5 package may require additional space on the PCB.

Working Principles

XC6124E446ER-G utilizes a feedback mechanism to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a stable output.

Detailed Application Field Plans

XC6124E446ER-G is commonly used in various electronic devices, including:

  1. Mobile phones
  2. Tablets
  3. Portable media players
  4. Digital cameras
  5. Wearable devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124E446ER-G are:

  1. LM1117-3.3: A popular voltage regulator with similar specifications.
  2. LT1763: A high-performance voltage regulator suitable for demanding applications.
  3. MCP1700: An economical voltage regulator option with low quiescent current.

These alternative models offer different features and specifications, allowing users to choose the most suitable option for their specific requirements.

Word count: 461 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät XC6124E446ER-G :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of XC6124E446ER-G in technical solutions:

  1. Question: What is XC6124E446ER-G?
    - Answer: XC6124E446ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6124E446ER-G?
    - Answer: The operating voltage range of XC6124E446ER-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6124E446ER-G detect voltage levels?
    - Answer: XC6124E446ER-G detects voltage levels by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or exceeds the reference voltage, it triggers an output signal.

  4. Question: What is the output type of XC6124E446ER-G?
    - Answer: XC6124E446ER-G has an open-drain output type, which means it can sink current but cannot source current.

  5. Question: What is the typical quiescent current consumption of XC6124E446ER-G?
    - Answer: The typical quiescent current consumption of XC6124E446ER-G is very low, usually around 1.0µA.

  6. Question: Can XC6124E446ER-G be used for overvoltage protection?
    - Answer: No, XC6124E446ER-G is primarily designed for undervoltage detection. It does not provide overvoltage protection functionality.

  7. Question: What is the typical voltage threshold accuracy of XC6124E446ER-G?
    - Answer: The typical voltage threshold accuracy of XC6124E446ER-G is ±1.5%.

  8. Question: Can XC6124E446ER-G be used in automotive applications?
    - Answer: Yes, XC6124E446ER-G is AEC-Q100 qualified and suitable for automotive applications.

  9. Question: Does XC6124E446ER-G have a built-in delay circuit?
    - Answer: No, XC6124E446ER-G does not have a built-in delay circuit. If a delay is required, an external delay circuit needs to be implemented.

  10. Question: What is the package type of XC6124E446ER-G?
    - Answer: XC6124E446ER-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications or application requirements.