XC9261B10DER-G belongs to the category of voltage regulators.
It is commonly used for voltage regulation in electronic circuits.
The specifications of XC9261B10DER-G are as follows:
XC9261B10DER-G has a total of six pins. The pin configuration is as follows:
The functional features of XC9261B10DER-G include:
Advantages: - Low dropout voltage ensures efficient voltage regulation. - Low quiescent current results in power savings. - Overcurrent and thermal shutdown protection enhance circuit reliability.
Disadvantages: - Limited maximum output current of 100mA may not be suitable for high-power applications. - Input voltage range is limited to 2.5V to 6.0V, which may restrict its use in certain circuits.
XC9261B10DER-G operates based on the principle of a linear voltage regulator. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. The regulator compares the output voltage with a reference voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.
XC9261B10DER-G finds application in various electronic devices and circuits, including but not limited to:
Some alternative models that can be considered as alternatives to XC9261B10DER-G are:
These alternative models provide similar functionality and can be chosen based on specific requirements and constraints.
In conclusion, XC9261B10DER-G is a low dropout voltage regulator that offers stable voltage regulation with low quiescent current consumption. It finds application in various electronic devices and circuits, providing reliable voltage regulation.
Sure! Here are 10 common questions and answers related to the application of XC9261B10DER-G in technical solutions:
Q1: What is XC9261B10DER-G? A1: XC9261B10DER-G is a voltage regulator IC (integrated circuit) that provides a stable output voltage for various electronic devices.
Q2: What is the input voltage range for XC9261B10DER-G? A2: The input voltage range for XC9261B10DER-G is typically between 2.5V and 6.0V.
Q3: What is the output voltage of XC9261B10DER-G? A3: The output voltage of XC9261B10DER-G is fixed at 1.0V.
Q4: What is the maximum output current of XC9261B10DER-G? A4: The maximum output current of XC9261B10DER-G is 100mA.
Q5: Can XC9261B10DER-G be used in battery-powered applications? A5: Yes, XC9261B10DER-G can be used in battery-powered applications as it has a low quiescent current and operates efficiently with low input voltages.
Q6: Does XC9261B10DER-G have built-in protection features? A6: Yes, XC9261B10DER-G has built-in protection features such as overcurrent protection, thermal shutdown, and reverse current protection.
Q7: Is XC9261B10DER-G suitable for space-constrained designs? A7: Yes, XC9261B10DER-G is available in a small package (e.g., SOT-25) which makes it suitable for space-constrained designs.
Q8: Can XC9261B10DER-G operate in a wide temperature range? A8: Yes, XC9261B10DER-G can operate in a wide temperature range, typically from -40°C to +85°C.
Q9: Can XC9261B10DER-G be used in automotive applications? A9: Yes, XC9261B10DER-G is AEC-Q100 qualified and can be used in automotive applications.
Q10: Are there any evaluation boards or reference designs available for XC9261B10DER-G? A10: Yes, Torex Semiconductor provides evaluation boards and reference designs for XC9261B10DER-G to facilitate its integration into various technical solutions.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.