Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
RN2968FE(TE85L,F)

RN2968FE(TE85L,F) Product Overview

Introduction

RN2968FE(TE85L,F) is a semiconductor product belonging to the category of voltage regulators. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: Regulating voltage in electronic circuits
  • Characteristics: High precision, low dropout voltage, low quiescent current
  • Package: SOT-23-5 package
  • Essence: Efficient voltage regulation for various electronic applications
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies by supplier

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.0V
  • Output Current: 150mA
  • Dropout Voltage: 160mV at 100mA
  • Quiescent Current: 30µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The RN2968FE(TE85L,F) has a standard SOT-23-5 pin configuration: 1. Vin (Input Voltage) 2. GND (Ground) 3. Enable (Shutdown Control) 4. Vout (Output Voltage) 5. NC (No Connection)

Functional Features

  • Low Dropout Voltage: Ensures stable output even with small input-output differentials
  • Low Quiescent Current: Minimizes power consumption in standby mode
  • Short-Circuit Protection: Safeguards the device and connected circuitry from damage
  • Thermal Shutdown: Prevents overheating under high load conditions

Advantages and Disadvantages

Advantages

  • High precision voltage regulation
  • Compact SOT-23-5 package
  • Wide operating temperature range

Disadvantages

  • Limited output current capacity
  • Restricted input voltage range

Working Principles

The RN2968FE(TE85L,F) operates by comparing the reference voltage with the feedback voltage to regulate the output voltage. It utilizes a feedback loop to adjust the pass transistor's conduction to maintain the desired output voltage.

Detailed Application Field Plans

The RN2968FE(TE85L,F) is suitable for various applications, including: - Battery-powered devices - Portable electronics - IoT devices - Wearable technology - Sensor modules

Detailed and Complete Alternative Models

Some alternative models to RN2968FE(TE85L,F) include: - LM1117 - MCP1702 - XC6206

In conclusion, RN2968FE(TE85L,F) offers precise voltage regulation in a compact package, making it ideal for a wide range of electronic applications.

Word Count: 410

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät RN2968FE(TE85L,F) :n soveltamiseen teknisissä ratkaisuissa

  1. What is the maximum operating frequency of RN2968FE(TE85L,F)?

    • The maximum operating frequency of RN2968FE(TE85L,F) is 2.4 GHz.
  2. What is the typical output power of RN2968FE(TE85L,F)?

    • The typical output power of RN2968FE(TE85L,F) is 20 dBm.
  3. What is the supply voltage range for RN2968FE(TE85L,F)?

    • The supply voltage range for RN2968FE(TE85L,F) is 1.8V to 3.6V.
  4. Does RN2968FE(TE85L,F) support multiple modulation schemes?

    • Yes, RN2968FE(TE85L,F) supports multiple modulation schemes including GFSK, MSK, and O-QPSK.
  5. What is the typical current consumption of RN2968FE(TE85L,F) in transmit mode?

    • The typical current consumption of RN2968FE(TE85L,F) in transmit mode is 17.5 mA.
  6. Is RN2968FE(TE85L,F) suitable for battery-powered applications?

    • Yes, RN2968FE(TE85L,F) is suitable for battery-powered applications due to its low power consumption.
  7. What is the typical range of RN2968FE(TE85L,F) in outdoor environments?

    • The typical range of RN2968FE(TE85L,F) in outdoor environments is approximately 1000 meters.
  8. Does RN2968FE(TE85L,F) have built-in error detection and correction capabilities?

    • Yes, RN2968FE(TE85L,F) has built-in error detection and correction capabilities to ensure reliable data transmission.
  9. Can RN2968FE(TE85L,F) be used in industrial automation applications?

    • Yes, RN2968FE(TE85L,F) is suitable for industrial automation applications due to its robust performance and long-range capabilities.
  10. What are the recommended external components to use with RN2968FE(TE85L,F)?

    • The recommended external components to use with RN2968FE(TE85L,F) include a matching network, RF switch, and power amplifier for optimal performance.