Toshiba Semiconductor and Storage
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
TB67B000FG,EL
Näytä Yksityiskohdat DataSheets

TB67B000FG,EL

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Motor Driver
  • Characteristics: High voltage, high current, and high-speed motor control
  • Package: QFN (Quad Flat No-leads) package
  • Essence: A versatile motor driver IC designed for various applications
  • Packaging/Quantity: Available in tape and reel packaging, quantity depends on supplier

Specifications

  • Operating Voltage: 10V - 50V
  • Output Current: Up to 3A per channel
  • Number of Channels: Dual-channel
  • Control Interface: PWM (Pulse Width Modulation)
  • Protection Features: Overcurrent protection, thermal shutdown, and undervoltage lockout

Pin Configuration

The TB67B000FG,EL has the following pin configuration:

  1. VCC1: Power supply for logic circuitry
  2. GND1: Ground for logic circuitry
  3. IN1: Input signal for Channel 1
  4. OUT1: Output for Channel 1
  5. VREF1: Reference voltage for Channel 1
  6. VCC2: Power supply for motor driver circuitry
  7. GND2: Ground for motor driver circuitry
  8. IN2: Input signal for Channel 2
  9. OUT2: Output for Channel 2
  10. VREF2: Reference voltage for Channel 2
  11. VM: Motor power supply
  12. VSENSE1: Current sense input for Channel 1
  13. VSENSE2: Current sense input for Channel 2
  14. NC: No connection
  15. NC: No connection
  16. NC: No connection

Functional Features

  • Dual-channel motor driver with independent control
  • Supports both forward and reverse motor rotation
  • Adjustable current limit for each channel
  • Built-in protection features for safe operation

Advantages and Disadvantages

Advantages: - High voltage and current capability - Fast motor control response - Compact QFN package for space-constrained applications - Overcurrent protection ensures safety

Disadvantages: - Requires external PWM signal for motor control - Limited to dual-channel motor control

Working Principles

The TB67B000FG,EL is based on a H-bridge configuration, allowing it to control the direction and speed of a motor. It utilizes PWM signals to adjust the duty cycle and control the motor's rotational speed. The IC also incorporates various protection features to prevent damage from overcurrent, thermal issues, and undervoltage conditions.

Application Field Plans

The TB67B000FG,EL is suitable for a wide range of applications, including:

  1. Robotics: Controlling motors in robotic systems for precise movements.
  2. Industrial Automation: Driving motors in conveyor belts, CNC machines, and other automated equipment.
  3. Automotive: Powering motors in electric vehicles, power windows, and seat adjustments.
  4. Home Appliances: Controlling motors in washing machines, vacuum cleaners, and air conditioners.
  5. Consumer Electronics: Motor control in drones, camera gimbals, and 3D printers.

Alternative Models

  1. TB67B000AFG,EL: Similar specifications but with additional fault detection features.
  2. TB67B000AHG,EL: Higher output current capability for more demanding applications.
  3. TB67B000APG,EL: Lower voltage range for battery-powered applications.

These alternative models provide similar functionality and can be considered as alternatives to the TB67B000FG,EL depending on specific requirements.

Word count: 386 words

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät TB67B000FG,EL :n soveltamiseen teknisissä ratkaisuissa

Sure! Here are 10 common questions and answers related to the application of TB67B000FG,EL in technical solutions:

  1. Q: What is TB67B000FG,EL? A: TB67B000FG,EL is a motor driver IC (integrated circuit) designed for controlling stepper motors or brushed DC motors.

  2. Q: What is the maximum voltage rating of TB67B000FG,EL? A: The maximum voltage rating of TB67B000FG,EL is typically 50V.

  3. Q: Can TB67B000FG,EL be used with both stepper motors and brushed DC motors? A: Yes, TB67B000FG,EL can be used with both stepper motors and brushed DC motors.

  4. Q: What is the maximum current rating of TB67B000FG,EL? A: The maximum current rating of TB67B000FG,EL is typically around 3A.

  5. Q: Does TB67B000FG,EL support microstepping for stepper motors? A: Yes, TB67B000FG,EL supports microstepping, allowing for smoother and more precise control of stepper motors.

  6. Q: Can TB67B000FG,EL be controlled using a microcontroller? A: Yes, TB67B000FG,EL can be easily controlled using a microcontroller through its input pins.

  7. Q: Is TB67B000FG,EL suitable for high-power applications? A: No, TB67B000FG,EL is not recommended for high-power applications as it has a relatively low current rating.

  8. Q: Does TB67B000FG,EL have built-in protection features? A: Yes, TB67B000FG,EL has various built-in protection features such as overcurrent protection, thermal shutdown, and undervoltage lockout.

  9. Q: Can TB67B000FG,EL be used in automotive applications? A: Yes, TB67B000FG,EL is suitable for automotive applications as it can operate within the required temperature range and has built-in protection features.

  10. Q: Are there any evaluation boards or reference designs available for TB67B000FG,EL? A: Yes, there are evaluation boards and reference designs available for TB67B000FG,EL, which can help in quickly prototyping and implementing motor control solutions.

Please note that the answers provided here are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and application notes provided by the manufacturer for detailed information.