TT Electronics/Optek Technology
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
OPB730F
Näytä Yksityiskohdat DataSheets

OPB730F

Product Overview

The OPB730F belongs to the category of optical sensors and is commonly used for detecting the presence or absence of an object. Its characteristics include high sensitivity, compact size, and reliable performance. The package typically includes the sensor itself along with any necessary mounting hardware. The essence of the OPB730F lies in its ability to accurately detect objects within its range. It is usually available in packaging quantities suitable for industrial or commercial use.

Specifications

  • Operating Voltage: 5V
  • Output Type: Phototransistor
  • Sensing Method: Reflective
  • Sensing Distance: Up to 10mm
  • Operating Temperature: -40°C to 85°C
  • Package Type: Through Hole

Detailed Pin Configuration

The OPB730F features a standard 3-pin configuration: 1. VCC (Power supply) 2. GND (Ground) 3. OUT (Output signal)

Functional Features

The OPB730F is designed to provide reliable object detection through its reflective sensing method. It offers a quick response time and can operate effectively in various environmental conditions. The phototransistor output ensures compatibility with different circuit configurations.

Advantages and Disadvantages

Advantages

  • High sensitivity
  • Compact size
  • Reliable performance
  • Wide operating temperature range

Disadvantages

  • Limited sensing distance
  • Susceptible to ambient light interference

Working Principles

When an object enters the sensing range of the OPB730F, it reflects the emitted light back to the sensor. This reflection triggers the phototransistor, producing an output signal that indicates the presence of the object. The sensor's design allows for precise detection and reliable operation.

Detailed Application Field Plans

The OPB730F finds extensive application in various industries, including: - Industrial automation for object detection in manufacturing processes - Robotics for proximity sensing and object tracking - Security systems for intrusion detection and access control

Detailed and Complete Alternative Models

  1. OPB700W Series: Offers similar functionality with enhanced ambient light rejection.
  2. TCST2103: Provides comparable reflective sensing capabilities with a different package type.

In conclusion, the OPB730F serves as a versatile optical sensor with reliable performance and broad applicability across different industries.

[Word Count: 319]

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät OPB730F :n soveltamiseen teknisissä ratkaisuissa

  1. What is OPB730F?

    • OPB730F is a reflective object sensor that consists of an infrared LED and a phototransistor in a single package.

  2. What are the typical applications of OPB730F?

    • OPB730F is commonly used for object detection, position sensing, and line following in robotics and automation systems.

  3. How does OPB730F work?

    • The infrared LED emits light, which is then reflected off an object and detected by the phototransistor, allowing the sensor to determine the presence or absence of the object.

  4. What is the operating voltage range for OPB730F?

    • OPB730F typically operates within a voltage range of 4.5V to 5.5V.

  5. What is the sensing distance of OPB730F?

    • The sensing distance of OPB730F is typically around 0.2 inches to 0.4 inches (5mm to 10mm).

  6. Can OPB730F be used in outdoor environments?

    • OPB730F is designed for indoor use and may not perform reliably in outdoor environments due to ambient light interference.

  7. What is the output type of OPB730F?

    • OPB730F provides a digital output, typically a logic high or low signal based on the presence or absence of the detected object.

  8. Is OPB730F sensitive to ambient light?

    • OPB730F is designed to minimize the effects of ambient light, but it may still be affected by very bright light sources.

  9. Can OPB730F be used for speed sensing applications?

    • While OPB730F is primarily used for proximity and object detection, it can also be utilized for speed sensing in certain applications.

  10. What are the key considerations for integrating OPB730F into a technical solution?

    • When integrating OPB730F, factors such as mounting distance, ambient light conditions, and electrical interfacing should be carefully considered to ensure optimal performance.