Vishay Semiconductor Diodes Division
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
GP15BHE3/73
Näytä Yksityiskohdat DataSheets

GP15BHE3/73 Product Overview

Introduction

The GP15BHE3/73 is a semiconductor product belonging to the category of diodes. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Diodes
  • Use: Rectification and signal processing in electronic circuits
  • Characteristics: High efficiency, low power consumption, fast response time
  • Package: SOD-123
  • Essence: Efficient rectification and signal processing
  • Packaging/Quantity: Typically packaged in reels of 3000 units

Specifications

  • Type: Schottky Barrier Diode
  • Maximum Forward Voltage Drop: 0.35V
  • Maximum Reverse Voltage: 40V
  • Maximum Forward Current: 1A
  • Operating Temperature Range: -65°C to +125°C

Detailed Pin Configuration

The GP15BHE3/73 typically has two pins: 1. Anode (A) 2. Cathode (K)

Functional Features

  • Fast switching speed
  • Low forward voltage drop
  • High current capability
  • Excellent thermal performance

Advantages and Disadvantages

Advantages

  • High efficiency
  • Low power consumption
  • Fast response time
  • Compact package size

Disadvantages

  • Limited maximum reverse voltage
  • Sensitive to temperature variations

Working Principles

The GP15BHE3/73 operates based on the principle of the Schottky barrier, which allows for faster switching and lower forward voltage drop compared to standard diodes.

Detailed Application Field Plans

The GP15BHE3/73 is commonly used in the following applications: - Power supplies - Voltage clamping circuits - Reverse polarity protection - Signal demodulation

Detailed and Complete Alternative Models

Some alternative models to the GP15BHE3/73 include: - 1N5817 - SS14 - BAT54S

In conclusion, the GP15BHE3/73 is a high-performance diode suitable for various electronic circuit applications, offering efficient rectification and signal processing capabilities.

[Word Count: 305]

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät GP15BHE3/73 :n soveltamiseen teknisissä ratkaisuissa

  1. What is the GP15BHE3/73?

    • The GP15BHE3/73 is a high-efficiency, low-power consumption diode used in various technical solutions.

  2. What are the typical applications of GP15BHE3/73?

    • The GP15BHE3/73 is commonly used in voltage rectification, freewheeling, polarity protection, and other general-purpose applications.

  3. What is the maximum forward voltage of GP15BHE3/73?

    • The maximum forward voltage of GP15BHE3/73 is typically around 0.7V at a forward current of 1A.

  4. What is the reverse recovery time of GP15BHE3/73?

    • The reverse recovery time of GP15BHE3/73 is usually in the range of tens of nanoseconds.

  5. What is the maximum forward current rating of GP15BHE3/73?

    • The maximum forward current rating of GP15BHE3/73 is typically around 1A.

  6. Is GP15BHE3/73 suitable for high-frequency applications?

    • Yes, GP15BHE3/73 is suitable for high-frequency applications due to its fast switching characteristics.

  7. Does GP15BHE3/73 require a heatsink for normal operation?

    • In most cases, GP15BHE3/73 does not require a heatsink for normal operation due to its low power dissipation.

  8. What are the temperature specifications for GP15BHE3/73?

    • GP15BHE3/73 is typically rated for operation within a temperature range of -55°C to 150°C.

  9. Can GP15BHE3/73 be used in automotive applications?

    • Yes, GP15BHE3/73 is often used in automotive electronics due to its reliability and performance under harsh conditions.

  10. Where can I find detailed technical specifications for GP15BHE3/73?

    • Detailed technical specifications for GP15BHE3/73 can be found in the datasheet provided by the manufacturer or distributor.