Vishay Semiconductor Diodes Division
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
MBRB1535CTHE3_A/P
Näytä Yksityiskohdat DataSheets

MBRB1535CTHE3_A/P

Introduction

The MBRB1535CTHE3_A/P is a diode belonging to the category of Schottky rectifiers. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Schottky rectifier diode
  • Use: It is used for high-frequency rectification and power supply applications.
  • Characteristics: The MBRB1535CTHE3_A/P offers low forward voltage drop, fast switching speed, and high reliability.
  • Package: It is available in a TO-263AB package.
  • Essence: The diode is designed to provide efficient rectification and power conversion.
  • Packaging/Quantity: Typically packaged in reels or tubes containing a specific quantity per package.

Specifications

  • Forward Voltage Drop: [Specify the value]
  • Reverse Voltage: [Specify the value]
  • Maximum Continuous Current: [Specify the value]
  • Operating Temperature Range: [Specify the range]

Detailed Pin Configuration

The MBRB1535CTHE3_A/P follows the standard pin configuration for diodes, with clear markings for the anode and cathode terminals.

Functional Features

  • Fast Switching Speed: Enables rapid response in rectification applications.
  • Low Forward Voltage Drop: Reduces power loss and improves efficiency.
  • High Reliability: Ensures consistent performance over the diode's lifespan.

Advantages and Disadvantages

Advantages

  • Efficient power conversion
  • Fast operation
  • Reliable performance

Disadvantages

  • Higher cost compared to standard rectifier diodes
  • Limited reverse voltage tolerance

Working Principles

The MBRB1535CTHE3_A/P operates based on the Schottky barrier principle, where the metal-semiconductor junction allows for faster switching and lower forward voltage drop compared to conventional PN-junction diodes.

Detailed Application Field Plans

The MBRB1535CTHE3_A/P is suitable for various applications, including: - Switching power supplies - DC-DC converters - Reverse polarity protection circuits - Freewheeling diodes in inductive load applications

Detailed and Complete Alternative Models

  • MBRB1545CTHE3_A/P: Similar characteristics with higher reverse voltage rating
  • MBRB1560CTHE3_A/P: Higher current handling capacity with comparable characteristics
  • MBRB1580CTHE3_A/P: Higher reverse voltage and current ratings for more demanding applications

In conclusion, the MBRB1535CTHE3_A/P is a reliable and efficient Schottky rectifier diode suitable for various power supply and rectification applications, offering fast switching speed and low forward voltage drop. Its specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models make it a versatile component in electronic designs.

[Word Count: 413]

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät MBRB1535CTHE3_A/P :n soveltamiseen teknisissä ratkaisuissa

  1. What is MBRB1535CTHE3_A/P?

    • MBRB1535CTHE3_A/P is a Schottky diode rectifier designed for high efficiency and low power loss in voltage regulation applications.

  2. What are the key features of MBRB1535CTHE3_A/P?

    • The key features include a low forward voltage drop, high current capability, and a compact surface mount package.

  3. What are the typical applications of MBRB1535CTHE3_A/P?

    • Typical applications include DC-DC converters, reverse polarity protection, freewheeling diodes, and OR-ing diodes in power supplies.

  4. What is the maximum forward voltage of MBRB1535CTHE3_A/P?

    • The maximum forward voltage is typically around 0.55V at a forward current of 15A.

  5. What is the maximum reverse voltage of MBRB1535CTHE3_A/P?

    • The maximum reverse voltage is 35V.

  6. What is the operating temperature range of MBRB1535CTHE3_A/P?

    • The operating temperature range is typically -65°C to +175°C.

  7. Does MBRB1535CTHE3_A/P have a low leakage current?

    • Yes, it has a low reverse leakage current, making it suitable for high-efficiency applications.

  8. Can MBRB1535CTHE3_A/P be used in automotive applications?

    • Yes, it is suitable for automotive applications due to its high reliability and temperature range.

  9. Is MBRB1535CTHE3_A/P RoHS compliant?

    • Yes, it is RoHS compliant, meeting environmental standards.

  10. What are the recommended PCB layout guidelines for MBRB1535CTHE3_A/P?

    • The manufacturer provides specific guidelines for PCB layout to ensure optimal performance and reliability.