Vishay Semiconductor Diodes Division
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
UH1CHE3_A/I
Näytä Yksityiskohdat DataSheets

UH1CHE3_A/I

Product Overview

Category

UH1CHE3_A/I belongs to the category of integrated circuits (ICs).

Use

It is used as a voltage regulator in electronic circuits.

Characteristics

  • UH1CHE3_A/I is known for its high precision and low dropout voltage.
  • It offers excellent line and load regulation.
  • The device operates over a wide temperature range.

Package

The UH1CHE3_A/I comes in a small outline package (SOP) with 8 pins.

Essence

The essence of UH1CHE3_A/I lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

The UH1CHE3_A/I is typically packaged in reels and available in quantities suitable for production runs.

Specifications

  • Input Voltage Range: 4.5V to 16V
  • Output Voltage Range: 1.2V to 12V
  • Dropout Voltage: 300mV at 1A
  • Operating Temperature Range: -40°C to 125°C
  • Quiescent Current: 75µA

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)
  4. NC (No Connection)
  5. NC (No Connection)
  6. NC (No Connection)
  7. NC (No Connection)
  8. EN (Enable)

Functional Features

  • Overcurrent Protection
  • Thermal Shutdown
  • Short-Circuit Protection
  • Enable Pin for On/Off Control

Advantages

  • High Precision
  • Low Dropout Voltage
  • Wide Operating Temperature Range
  • Small Package Size

Disadvantages

  • Limited Output Current
  • Higher Cost Compared to Non-regulated Solutions

Working Principles

UH1CHE3_A/I operates by comparing the output voltage to a reference voltage and adjusting the pass element to maintain a constant output voltage despite changes in input voltage and load current.

Detailed Application Field Plans

UH1CHE3_A/I is commonly used in battery-powered devices, portable electronics, and automotive applications where a stable voltage supply is critical for proper operation of sensitive components.

Detailed and Complete Alternative Models

  • LM317
  • LT1086
  • ADP3338

This completes the entry for UH1CHE3_A/I, providing comprehensive information about its product details, specifications, features, and application areas.

Word Count: 324

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät UH1CHE3_A/I :n soveltamiseen teknisissä ratkaisuissa

  1. What is UH1CHE3_A/I?

    • UH1CHE3_A/I is a specific chemical compound used in technical solutions for its unique properties.

  2. What are the main applications of UH1CHE3_A/I in technical solutions?

    • UH1CHE3_A/I is commonly used as a corrosion inhibitor, lubricant additive, or as a component in hydraulic fluids and industrial coatings.

  3. How does UH1CHE3_A/I act as a corrosion inhibitor?

    • UH1CHE3_A/I forms a protective layer on metal surfaces, preventing corrosion and extending the lifespan of equipment and infrastructure.

  4. In what ways can UH1CHE3_A/I be used as a lubricant additive?

    • UH1CHE3_A/I can improve the lubricating properties of oils and greases, reducing friction and wear in mechanical systems.

  5. What are the environmental considerations when using UH1CHE3_A/I in technical solutions?

    • UH1CHE3_A/I should be handled and disposed of according to environmental regulations to prevent contamination of soil and water sources.

  6. Are there any safety precautions to consider when working with UH1CHE3_A/I?

    • Proper personal protective equipment should be worn when handling UH1CHE3_A/I, and exposure should be minimized to avoid potential health risks.

  7. Can UH1CHE3_A/I be used in combination with other chemicals or additives?

    • Yes, UH1CHE3_A/I can often be formulated with other chemicals to enhance its performance in specific technical applications.

  8. What are the storage requirements for UH1CHE3_A/I?

    • UH1CHE3_A/I should be stored in a cool, dry, well-ventilated area away from incompatible materials and sources of ignition.

  9. Is UH1CHE3_A/I compatible with all types of metals and materials?

    • It's important to verify the compatibility of UH1CHE3_A/I with specific metals and materials to avoid any adverse reactions or damage.

  10. What are the typical concentrations of UH1CHE3_A/I used in technical solutions?

    • The concentration of UH1CHE3_A/I varies depending on the application, and it's essential to follow recommended guidelines and formulations for optimal results.