Vishay Semiconductor Diodes Division
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
VBT2080C-M3/4W
Näytä Yksityiskohdat DataSheets

VBT2080C-M3/4W Product Overview

Introduction

The VBT2080C-M3/4W is a versatile electronic component designed for use in various applications. This entry provides a comprehensive overview of the product, including its category, basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Electronic Component
  • Use: Signal Processing and Amplification
  • Characteristics: High Frequency, Low Noise, Compact Design
  • Package: SMD (Surface Mount Device)
  • Essence: RF Amplifier Module
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Frequency Range: 2 to 8 GHz
  • Gain: 20 dB
  • Noise Figure: 1.5 dB
  • Input Power: 17 dBm
  • Supply Voltage: 3.3 V
  • Current Consumption: 80 mA

Detailed Pin Configuration

The VBT2080C-M3/4W features a 6-pin configuration: 1. VCC (Power Supply) 2. GND (Ground) 3. RF IN (Radio Frequency Input) 4. RF OUT (Radio Frequency Output) 5. EN (Enable) 6. BIAS (Bias Voltage)

Functional Features

  • Wide frequency range for versatile applications
  • Low noise figure for enhanced signal quality
  • Compact SMD package for space-constrained designs
  • Enable pin for power management control
  • Bias voltage support for flexible operation

Advantages and Disadvantages

Advantages

  • High gain amplification
  • Low power consumption
  • Wide operating frequency range
  • Compact and easy to integrate

Disadvantages

  • Limited input power handling capacity
  • Sensitivity to supply voltage fluctuations

Working Principles

The VBT2080C-M3/4W operates as an RF amplifier module, utilizing internal circuitry to amplify and process radio frequency signals within the specified frequency range. The input signal is amplified with low noise and high gain, making it suitable for various communication and signal processing applications.

Detailed Application Field Plans

The VBT2080C-M3/4W is ideal for use in the following applications: - Wireless Communication Systems - Radar Systems - Test and Measurement Equipment - Satellite Communication Systems - Microwave Links

Detailed and Complete Alternative Models

For users seeking alternative options, the following models can be considered: 1. VBT2060C-M3/4W: Similar specifications with a lower frequency range 2. VBT2100C-M3/4W: Higher frequency range and gain with similar form factor 3. VBT2080C-M3/8W: Increased output power handling capability within the same frequency range

In conclusion, the VBT2080C-M3/4W offers a compact and efficient solution for RF signal processing and amplification, catering to a wide range of applications while providing high performance and reliability.

Word Count: 443

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät VBT2080C-M3/4W :n soveltamiseen teknisissä ratkaisuissa

  1. What is the maximum power output of VBT2080C-M3/4W?

    • The maximum power output of VBT2080C-M3/4W is 80 watts.

  2. What is the operating frequency range of VBT2080C-M3/4W?

    • VBT2080C-M3/4W operates within the frequency range of 2080 MHz to 2200 MHz.

  3. What are the typical applications for VBT2080C-M3/4W?

    • VBT2080C-M3/4W is commonly used in wireless communication systems, radar systems, and satellite communication applications.

  4. What is the input voltage range for VBT2080C-M3/4W?

    • The input voltage range for VBT2080C-M3/4W is typically between 10V to 28V.

  5. Does VBT2080C-M3/4W require external cooling?

    • Yes, VBT2080C-M3/4W requires external cooling to maintain optimal performance.

  6. What type of connectors does VBT2080C-M3/4W use?

    • VBT2080C-M3/4W typically uses SMA connectors for RF input and output.

  7. Is VBT2080C-M3/4W suitable for outdoor applications?

    • Yes, VBT2080C-M3/4W is designed to be suitable for outdoor applications with proper weatherproofing and environmental protection.

  8. What is the typical efficiency of VBT2080C-M3/4W?

    • The typical efficiency of VBT2080C-M3/4W is around 40% to 50% depending on the operating conditions.

  9. Can VBT2080C-M3/4W be integrated into a phased array system?

    • Yes, VBT2080C-M3/4W can be integrated into a phased array system to provide beamforming capabilities.

  10. What are the key thermal management considerations for VBT2080C-M3/4W?

    • Proper heat sinking and thermal dissipation are crucial for maintaining the performance and reliability of VBT2080C-M3/4W, especially under high-power operation.