Vishay Siliconix
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
DG201BDQ-E3
Näytä Yksityiskohdat DataSheets

DG201BDQ-E3

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Analog Switch
  • Characteristics: High performance, low power consumption
  • Package: Dual Inline Package (DIP)
  • Essence: Efficient signal routing and switching
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage: ±5V to ±20V
  • On-Resistance: 50Ω (typical)
  • Off-Leakage Current: 1nA (maximum)
  • Operating Temperature Range: -40°C to +85°C
  • Switching Time: 100ns (maximum)

Detailed Pin Configuration

The DG201BDQ-E3 has a total of 16 pins. The pin configuration is as follows:

  1. V+
  2. D1
  3. D2
  4. D3
  5. D4
  6. D5
  7. D6
  8. D7
  9. D8
  10. GND
  11. S1
  12. S2
  13. S3
  14. S4
  15. S5
  16. S6

Functional Features

  • Low on-resistance for minimal signal distortion
  • Wide supply voltage range for versatile applications
  • Low off-leakage current for energy efficiency
  • Fast switching time for rapid signal routing

Advantages

  • High performance and reliability
  • Low power consumption
  • Compact and easy to integrate into circuit designs
  • Suitable for various analog switch applications

Disadvantages

  • Limited number of channels (6 channels)
  • Not suitable for high-frequency applications

Working Principles

The DG201BDQ-E3 is an analog switch that operates by controlling the flow of signals between its input and output channels. It utilizes MOSFET technology to achieve low on-resistance and fast switching times. When a control signal is applied to the appropriate pin, the switch opens or closes, allowing or blocking the passage of signals.

Detailed Application Field Plans

The DG201BDQ-E3 is commonly used in various applications, including:

  1. Audio and video signal routing
  2. Data acquisition systems
  3. Test and measurement equipment
  4. Communication systems
  5. Industrial automation

Detailed and Complete Alternative Models

  1. DG202BDQ-E3: Similar to DG201BDQ-E3 but with 4 channels instead of 6.
  2. DG203BDQ-E3: Similar to DG201BDQ-E3 but with 8 channels instead of 6.
  3. DG204BDQ-E3: Similar to DG201BDQ-E3 but with 16 channels instead of 6.

These alternative models provide flexibility in channel count to suit different application requirements.

Note: The above information is subject to change. Please refer to the product datasheet for the most up-to-date specifications and details.

Word Count: 314

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät DG201BDQ-E3 :n soveltamiseen teknisissä ratkaisuissa

  1. What is the maximum input voltage for DG201BDQ-E3?
    - The maximum input voltage for DG201BDQ-E3 is +/- 22V.

  2. What is the on-resistance of DG201BDQ-E3?
    - The on-resistance of DG201BDQ-E3 is typically 35 ohms.

  3. Can DG201BDQ-E3 be used in audio applications?
    - Yes, DG201BDQ-E3 can be used in audio applications due to its low on-resistance and high bandwidth.

  4. What is the operating temperature range of DG201BDQ-E3?
    - The operating temperature range of DG201BDQ-E3 is -40°C to +85°C.

  5. Is DG201BDQ-E3 suitable for battery-powered applications?
    - Yes, DG201BDQ-E3 is suitable for battery-powered applications due to its low power consumption.

  6. Can DG201BDQ-E3 be used as a multiplexer in data acquisition systems?
    - Yes, DG201BDQ-E3 can be used as a multiplexer in data acquisition systems due to its low on-resistance and high channel-to-channel isolation.

  7. What is the package type of DG201BDQ-E3?
    - DG201BDQ-E3 is available in a 16-pin SOIC package.

  8. Does DG201BDQ-E3 have built-in ESD protection?
    - Yes, DG201BDQ-E3 has built-in ESD protection up to 2kV.

  9. Can DG201BDQ-E3 be used in industrial control systems?
    - Yes, DG201BDQ-E3 can be used in industrial control systems due to its wide operating temperature range and robustness.

  10. What is the typical bandwidth of DG201BDQ-E3?
    - The typical bandwidth of DG201BDQ-E3 is 100MHz.