Vishay Siliconix
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
SIUD402ED-T1-GE3
Näytä Yksityiskohdat DataSheets

SIUD402ED-T1-GE3

Introduction

The SIUD402ED-T1-GE3 is a high-performance integrated circuit that belongs to the category of Ethernet transceivers. This device is designed for use in networking and communication applications, offering various characteristics and features that make it suitable for a wide range of networking solutions.

Basic Information Overview

  • Category: Ethernet Transceiver
  • Use: Networking and Communication Applications
  • Characteristics: High Performance, Reliable Data Transmission
  • Package: Small Outline Integrated Circuit (SOIC)
  • Essence: Facilitates Ethernet Connectivity
  • Packaging/Quantity: Typically available in reels with varying quantities

Specifications

The SIUD402ED-T1-GE3 features the following specifications: - Data Rate: 10/100 Mbps - Interface: RJ-45 - Operating Voltage: 3.3V - Temperature Range: -40°C to 85°C - Compliance: IEEE 802.3 Standard

Detailed Pin Configuration

The detailed pin configuration of the SIUD402ED-T1-GE3 includes the following key pins: 1. VCC 2. TX+ 3. TX- 4. RX+ 5. RX- 6. MDI/MDIX 7. GND

Functional Features

  • Auto-Negotiation: The transceiver supports auto-negotiation for seamless connectivity.
  • Signal Integrity: It ensures high signal integrity for reliable data transmission.
  • Energy Efficiency: Incorporates energy-efficient features for reduced power consumption.

Advantages and Disadvantages

Advantages

  • High Data Rate: Supports data rates of up to 100 Mbps for fast network performance.
  • Compact Design: The small form factor makes it suitable for space-constrained applications.
  • Robust Connectivity: Ensures robust and stable Ethernet connectivity.

Disadvantages

  • Limited Data Rate: May not be suitable for high-speed Gigabit Ethernet applications.
  • Temperature Sensitivity: Operating temperature range may limit deployment in extreme environments.

Working Principles

The SIUD402ED-T1-GE3 operates by receiving and transmitting Ethernet signals through the RJ-45 interface. It utilizes advanced signal processing techniques to ensure reliable data transmission while adhering to the IEEE 802.3 standard for Ethernet communication.

Detailed Application Field Plans

The SIUD402ED-T1-GE3 is well-suited for various networking applications, including: - Industrial Automation - Home Networking - Embedded Systems - IoT Devices

Detailed and Complete Alternative Models

For users seeking alternative models, the following options are available: - SIUD401ED-T1-GE3: Similar functionality with different pin configurations - SIUD403ED-T1-GE3: Higher data rate support for Gigabit Ethernet applications - SIUD404ED-T1-GE3: Enhanced temperature range for extreme environment deployments

In conclusion, the SIUD402ED-T1-GE3 Ethernet transceiver offers a reliable and efficient solution for networking and communication applications, catering to diverse industry needs with its compact design and robust performance.

[Word Count: 410]

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät SIUD402ED-T1-GE3 :n soveltamiseen teknisissä ratkaisuissa

  1. What is the SIUD402ED-T1-GE3 used for in technical solutions?

    • The SIUD402ED-T1-GE3 is a high-speed, low-power, quad-channel digital isolator designed for use in industrial automation, motor control, and other technical solutions requiring robust signal isolation.

  2. What are the key features of the SIUD402ED-T1-GE3?

    • The key features include 4 channels of isolation, data rates up to 150 Mbps, low power consumption, and high common-mode transient immunity.

  3. How does the SIUD402ED-T1-GE3 provide signal isolation?

    • The device uses capacitive coupling technology to provide galvanic isolation between input and output channels, ensuring reliable signal transmission in noisy environments.

  4. What are the typical applications for the SIUD402ED-T1-GE3 in technical solutions?

    • Typical applications include isolated interface for SPI, RS-485, RS-422, and other communication buses, as well as isolated gate drivers for power electronics.

  5. What are the voltage and temperature specifications for the SIUD402ED-T1-GE3?

    • The device supports a wide operating voltage range from 2.7V to 5.5V and operates over a temperature range of -40°C to 125°C.

  6. Does the SIUD402ED-T1-GE3 support reinforced isolation for safety-critical applications?

    • Yes, the device provides reinforced isolation meeting international safety standards, making it suitable for safety-critical applications.

  7. Can the SIUD402ED-T1-GE3 be used in harsh industrial environments?

    • Yes, the device is designed to withstand harsh industrial environments with high common-mode transient immunity and robust isolation performance.

  8. Are there evaluation kits available for the SIUD402ED-T1-GE3?

    • Yes, evaluation kits are available to help engineers quickly prototype and evaluate the performance of the SIUD402ED-T1-GE3 in their technical solutions.

  9. What are the EMI/EMC characteristics of the SIUD402ED-T1-GE3?

    • The device has been designed with strong EMI/EMC performance to ensure reliable operation in electrically noisy environments.

  10. Is the SIUD402ED-T1-GE3 compliant with industry standards and regulations?

    • Yes, the device is compliant with relevant industry standards and regulations, ensuring its suitability for integration into technical solutions.