WeEn Semiconductors
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
BT131-600D/L01EP
Näytä Yksityiskohdat DataSheets

BT131-600D/L01EP

Product Overview

Category: Semiconductor
Use: Power switching in electronic circuits
Characteristics: High voltage capability, low power consumption
Package: TO-92
Essence: NPN silicon epitaxial planar transistor
Packaging/Quantity: Bulk/1000 per reel

Specifications

  • Collector-Emitter Voltage: 400V
  • Collector Current: 1A
  • Power Dissipation: 625mW
  • Transition Frequency: 100MHz
  • Operating Temperature: -65°C to 150°C

Detailed Pin Configuration

  1. Emitter (E)
  2. Base (B)
  3. Collector (C)

Functional Features

  • Fast switching speed
  • Low leakage current
  • High voltage capability

Advantages and Disadvantages

Advantages: - Suitable for high voltage applications - Low power consumption

Disadvantages: - Limited current handling capacity

Working Principles

The BT131-600D/L01EP operates as a switch in electronic circuits. When a small current flows into the base, it controls a larger current between the collector and emitter.

Detailed Application Field Plans

  1. Power supplies
  2. Lighting control
  3. Motor control

Detailed and Complete Alternative Models

  1. BT131-600D
  2. BT131-600L
  3. BT131-600EP

This comprehensive entry provides an in-depth understanding of the BT131-600D/L01EP, covering its category, use, characteristics, package, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät BT131-600D/L01EP :n soveltamiseen teknisissä ratkaisuissa

  1. What is the maximum voltage and current rating of BT131-600D/L01EP?

    • The maximum voltage rating is 600V, and the maximum current rating is 1A.

  2. What are the typical applications for BT131-600D/L01EP?

    • Typical applications include switching inductive loads such as motors, solenoids, and transformers, as well as dimming and speed control in lighting and fan systems.

  3. What is the recommended operating temperature range for BT131-600D/L01EP?

    • The recommended operating temperature range is -40°C to 125°C.

  4. Does BT131-600D/L01EP require a heat sink for operation?

    • It depends on the application and the load current. For higher load currents or extended operation, a heat sink may be necessary.

  5. Can BT131-600D/L01EP be used for AC or DC switching?

    • Yes, it can be used for both AC and DC switching applications.

  6. What is the typical trigger current for BT131-600D/L01EP?

    • The typical trigger current is 5mA.

  7. Is BT131-600D/L01EP suitable for use in high-frequency switching applications?

    • No, it is not recommended for high-frequency switching due to its inherent turn-on and turn-off times.

  8. What is the isolation voltage rating for BT131-600D/L01EP?

    • The isolation voltage rating is typically around 1500V.

  9. Can BT131-600D/L01EP be used for phase control in AC circuits?

    • Yes, it can be used for phase control in AC circuits, particularly in dimming applications.

  10. Are there any special considerations for driving BT131-600D/L01EP with a microcontroller or digital logic circuit?

    • It is important to ensure that the triggering signal meets the minimum requirements for current and voltage, and to provide proper isolation between the control circuit and the BT131-600D/L01EP to prevent damage from voltage spikes or transients.