WeEn Semiconductors
Kuva saattaa olla esitys.
Katso tuotteen tekniset tiedot.
BTA208-600B,127
Näytä Yksityiskohdat DataSheets

BTA208-600B,127

Product Overview

Category

The BTA208-600B,127 belongs to the category of semiconductor devices.

Use

It is commonly used for controlling high power loads in various electronic applications.

Characteristics

  • High power handling capability
  • Suitable for AC switching applications
  • Low on-state voltage drop
  • Overvoltage protection

Package

The BTA208-600B,127 is typically available in a TO-220AB package.

Essence

This product is essential for efficient and reliable control of high power loads in electronic circuits.

Packaging/Quantity

The BTA208-600B,127 is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Maximum Voltage: 600V
  • Current Rating: 8A
  • Gate Trigger Current: 35mA
  • On-State Voltage: 1.55V
  • Holding Current: 50mA
  • Non-Repetitive Surge Current: 80A

Detailed Pin Configuration

The BTA208-600B,127 typically has three pins: 1. Main Terminal 1 (MT1) 2. Gate (G) 3. Main Terminal 2 (MT2)

Functional Features

  • High current handling capacity
  • Reliable switching performance
  • Built-in overvoltage protection
  • Low on-state voltage drop

Advantages

  • Suitable for high power applications
  • Robust construction for long-term reliability
  • Effective overvoltage protection

Disadvantages

  • Higher gate trigger current compared to some alternative models
  • Relatively higher on-state voltage drop

Working Principles

The BTA208-600B,127 operates based on the principle of controlled conduction, where the gate signal controls the flow of current between the main terminals.

Detailed Application Field Plans

This product is widely used in applications such as: - AC motor control - Industrial heating systems - Power supplies - Lighting control

Detailed and Complete Alternative Models

Some alternative models to consider include: - BTA208X-600B,127 - BTA208-800B,127 - BTA41600B,127

In conclusion, the BTA208-600B,127 is a semiconductor device designed for efficient and reliable control of high power loads in various electronic applications. Its robust characteristics and functional features make it suitable for a wide range of industrial and consumer electronics applications.

[Word count: 345]

Luettele 10 yleistä kysymystä ja vastausta, jotka liittyvät BTA208-600B,127 :n soveltamiseen teknisissä ratkaisuissa

  1. What is the maximum voltage rating of BTA208-600B,127?

    • The maximum voltage rating of BTA208-600B,127 is 600V.

  2. What is the maximum current rating of BTA208-600B,127?

    • The maximum current rating of BTA208-600B,127 is typically 8A.

  3. What type of package does BTA208-600B,127 come in?

    • BTA208-600B,127 comes in a TO-220AB package.

  4. What are the typical applications for BTA208-600B,127?

    • BTA208-600B,127 is commonly used in AC motor control, lighting, and heating applications.

  5. What is the on-state voltage drop of BTA208-600B,127?

    • The on-state voltage drop of BTA208-600B,127 is typically around 1.55V at 8A.

  6. Does BTA208-600B,127 require a heat sink for operation?

    • Yes, BTA208-600B,127 typically requires a heat sink for efficient operation, especially at higher currents.

  7. What is the maximum junction temperature for BTA208-600B,127?

    • The maximum junction temperature for BTA208-600B,127 is 150°C.

  8. Is BTA208-600B,127 suitable for high-frequency switching applications?

    • No, BTA208-600B,127 is not recommended for high-frequency switching due to its characteristics.

  9. What are the recommended storage conditions for BTA208-600B,127?

    • BTA208-600B,127 should be stored in a cool, dry place with minimal exposure to moisture and contaminants.

  10. Are there any specific precautions to consider when using BTA208-600B,127 in technical solutions?

    • It's important to ensure proper insulation and cooling for BTA208-600B,127, and to follow the manufacturer's guidelines for safe and effective use.